Good grief. Sorry, it should only take a few minutes to install Gorm. :) This seems like a package dependency issue with ports more than anything else.
Later, G. Gregory Casamento -- Principal Consultant - OLC, Inc # GNUstep Chief Maintainer ----- Original Message ---- From: Lars Sonchocky-Helldorf <[EMAIL PROTECTED]> To: GNUstep Discuss <[email protected]> Sent: Thursday, May 15, 2008 3:04:17 PM Subject: Somewhere else someone else has problems with GORM Forwarded Mails from [EMAIL PROTECTED]: Anfang der weitergeleiteten E-Mail: > Von: Christopher Choi <[EMAIL PROTECTED]> > Datum: 8. Mai 2008 11:08:31 MESZ > An: [EMAIL PROTECTED] > Betreff: Gorm taking ages to compile? > > Hi > I'm went to install Gorm from the ports by issuing the command sudo > port > install gorm...and it was going well until well its taking a whole > night to > do it, and its still doing the compilation of Gcc42... > I have a Titanium G4 1GHz with 1Gb RAM so would that explain why > its going > so slowly? but I still don't get why installing Gorm an application > can take > such a long time.. > > this is what the compiling output is: > > Titan:~ Chris$ sudo port install gorm > ---> Fetching expat > ---> Attempting to fetch expat-2.0.1.tar.gz from > http://downloads.sourceforge.net/expat > ---> Verifying checksum(s) for expat > ---> Extracting expat > ---> Configuring expat > ---> Building expat with target all > ---> Staging expat into destroot > ---> Installing expat 2.0.1_0 > ---> Activating expat 2.0.1_0 > ---> Cleaning expat > ---> Fetching zlib > ---> Attempting to fetch zlib-1.2.3.tar.bz2 from http://www.zlib.net/ > ---> Verifying checksum(s) for zlib > ---> Extracting zlib > ---> Applying patches to zlib > ---> Configuring zlib > ---> Building zlib with target all > ---> Staging zlib into destroot > ---> Installing zlib 1.2.3_1 > ---> Activating zlib 1.2.3_1 > ---> Cleaning zlib > ---> Fetching freetype > ---> Attempting to fetch freetype-2.3.5.tar.bz2 from > http://download.savannah.gnu.org/releases/freetype/ > ---> Verifying checksum(s) for freetype > ---> Extracting freetype > ---> Applying patches to freetype > ---> Configuring freetype > ---> Building freetype with target all > ---> Staging freetype into destroot > ---> Installing freetype 2.3.5_1 > ---> Activating freetype 2.3.5_1 > ---> Cleaning freetype > ---> Fetching libiconv > ---> Attempting to fetch libiconv-1.12.tar.gz from > http://ftp.gnu.org/gnu/libiconv > ---> Verifying checksum(s) for libiconv > ---> Extracting libiconv > ---> Applying patches to libiconv > ---> Configuring libiconv > ---> Building libiconv with target all > ---> Staging libiconv into destroot > ---> Installing libiconv 1.12_0 > ---> Activating libiconv 1.12_0 > ---> Cleaning libiconv > ---> Fetching fontconfig > ---> Attempting to fetch fontconfig-2.5.0.tar.gz from > http://fontconfig.org/release/ > ---> Verifying checksum(s) for fontconfig > ---> Extracting fontconfig > ---> Configuring fontconfig > ---> Building fontconfig with target all > ---> Staging fontconfig into destroot > ---> Installing fontconfig 2.5.0_0+macosx > ---> Activating fontconfig 2.5.0_0+macosx > ---> Cleaning fontconfig > ---> Fetching pkgconfig > ---> Attempting to fetch pkg-config-0.23.tar.gz from > http://pkg-config.freedesktop.org/releases/ > ---> Verifying checksum(s) for pkgconfig > ---> Extracting pkgconfig > ---> Configuring pkgconfig > ---> Building pkgconfig with target all > ---> Staging pkgconfig into destroot > ---> Installing pkgconfig 0.23_0 > ---> Activating pkgconfig 0.23_0 > ---> Cleaning pkgconfig > ---> Fetching xorg-util-macros > ---> Attempting to fetch util-macros-1.1.5.tar.bz2 from > http://www.x.org/pub/individual/util/ > ---> Verifying checksum(s) for xorg-util-macros > ---> Extracting xorg-util-macros > ---> Configuring xorg-util-macros > ---> Building xorg-util-macros with target all > ---> Staging xorg-util-macros into destroot > ---> Installing xorg-util-macros 1.1.5_0 > ---> Activating xorg-util-macros 1.1.5_0 > ---> Cleaning xorg-util-macros > ---> Fetching xorg-xproto > ---> Attempting to fetch xproto-7.0.11.tar.bz2 from > http://www.x.org/pub/individual/proto/ > ---> Verifying checksum(s) for xorg-xproto > ---> Extracting xorg-xproto > ---> Applying patches to xorg-xproto > ---> Configuring xorg-xproto > ---> Building xorg-xproto with target all > ---> Staging xorg-xproto into destroot > ---> Installing xorg-xproto 7.0.11_1 > ---> Activating xorg-xproto 7.0.11_1 > ---> Cleaning xorg-xproto > ---> Fetching render > ---> Attempting to fetch renderext-0.9.tar.bz2 from > http://xlibs.freedesktop.org/release/ > ---> Verifying checksum(s) for render > ---> Extracting render > ---> Configuring render > ---> Building render with target all > ---> Staging render into destroot > ---> Installing render 0.9_1 > ---> Activating render 0.9_1 > ---> Cleaning render > ---> Fetching xrender > ---> Attempting to fetch libXrender-0.9.0.tar.bz2 from > http://xlibs.freedesktop.org/release/ > ---> Verifying checksum(s) for xrender > ---> Extracting xrender > ---> Configuring xrender > ---> Building xrender with target all > ---> Staging xrender into destroot > ---> Installing xrender 0.9.0_2 > ---> Activating xrender 0.9.0_2 > ---> Cleaning xrender > ---> Fetching Xft2 > ---> Attempting to fetch libXft-2.1.12.tar.bz2 from > http://xorg.freedesktop.org/releases/individual/lib/ > ---> Verifying checksum(s) for Xft2 > ---> Extracting Xft2 > ---> Configuring Xft2 > ---> Building Xft2 with target all > ---> Staging Xft2 into destroot > ---> Installing Xft2 2.1.12_0 > ---> Activating Xft2 2.1.12_0 > ---> Cleaning Xft2 > ---> Fetching ncursesw > ---> Attempting to fetch ncurses-5.6.tar.gz from > http://ftp.gnu.org/gnu/ncurses > ---> Verifying checksum(s) for ncursesw > ---> Extracting ncursesw > ---> Applying patches to ncursesw > ---> Configuring ncursesw > ---> Building ncursesw with target all > ---> Staging ncursesw into destroot > ---> Installing ncursesw 5.6_1 > ---> Activating ncursesw 5.6_1 > ---> Cleaning ncursesw > ---> Fetching ncurses > ---> Verifying checksum(s) for ncurses > ---> Extracting ncurses > ---> Applying patches to ncurses > ---> Configuring ncurses > ---> Building ncurses with target all > ---> Staging ncurses into destroot > ---> Installing ncurses 5.6_0 > ---> Activating ncurses 5.6_0 > ---> Cleaning ncurses > ---> Fetching gettext > ---> Attempting to fetch gettext-0.17.tar.gz from > http://ftp.gnu.org/gnu/gettext > ---> Verifying checksum(s) for gettext > ---> Extracting gettext > ---> Applying patches to gettext > ---> Configuring gettext > ---> Building gettext with target all > ---> Staging gettext into destroot > ---> Installing gettext 0.17_3 > ---> Activating gettext 0.17_3 > ---> Cleaning gettext > ---> Fetching texinfo > ---> Attempting to fetch texinfo-4.11.tar.bz2 from > http://ftp.gnu.org/gnu/texinfo > ---> Verifying checksum(s) for texinfo > ---> Extracting texinfo > ---> Configuring texinfo > ---> Building texinfo with target all > ---> Staging texinfo into destroot > ---> Installing texinfo 4.11_0 > ---> Activating texinfo 4.11_0 > ---> Cleaning texinfo > ---> Fetching aspell > ---> Attempting to fetch aspell-0.60.6.tar.gz from > http://ftp.gnu.org/gnu/aspell > ---> Verifying checksum(s) for aspell > ---> Extracting aspell > ---> Configuring aspell > ---> Building aspell with target all > ---> Staging aspell into destroot > ---> Installing aspell 0.60.6_0+macosx > ****************************************************************** > You must install (at least) one of the language dictionaries after > installing this port in order for it to work. > ****************************************************************** > ---> Activating aspell 0.60.6_0+macosx > ---> Cleaning aspell > ---> Fetching gmp > ---> Attempting to fetch gmp-4.2.2.tar.bz2 from http://ftp.gnu.org/ > gnu/gmp > ---> Verifying checksum(s) for gmp > ---> Extracting gmp > ---> Configuring gmp > ---> Building gmp with target all > ---> Staging gmp into destroot > ---> Installing gmp 4.2.2_1 > ---> Activating gmp 4.2.2_1 > ---> Cleaning gmp > ---> Fetching mpfr > ---> Attempting to fetch mpfr-2.3.1.tar.bz2 from > http://www.mpfr.org/mpfr-2.3.1/ > ---> Verifying checksum(s) for mpfr > ---> Extracting mpfr > ---> Configuring mpfr > ---> Building mpfr with target all > ---> Staging mpfr into destroot > ---> Installing mpfr 2.3.1_0 > ---> Activating mpfr 2.3.1_0 > ---> Cleaning mpfr > ---> Fetching gcc42 > ---> Attempting to fetch gcc-core-4.2.3.tar.bz2 from > ftp://ftp.funet.fi/pub/mirrors/sources.redhat.com/pub/gcc/releases/ > gcc-4.2.3/ > ---> Attempting to fetch gcc-fortran-4.2.3.tar.bz2 from > ftp://ftp.funet.fi/pub/mirrors/sources.redhat.com/pub/gcc/releases/ > gcc-4.2.3/ > ---> Attempting to fetch gcc-g++-4.2.3.tar.bz2 from > ftp://ftp.funet.fi/pub/mirrors/sources.redhat.com/pub/gcc/releases/ > gcc-4.2.3/ > ---> Attempting to fetch gcc-java-4.2.3.tar.bz2 from > ftp://ftp.funet.fi/pub/mirrors/sources.redhat.com/pub/gcc/releases/ > gcc-4.2.3/ > ---> Attempting to fetch gcc-objc-4.2.3.tar.bz2 from > ftp://ftp.funet.fi/pub/mirrors/sources.redhat.com/pub/gcc/releases/ > gcc-4.2.3/ > ---> Verifying checksum(s) for gcc42 > ---> Extracting gcc42 > ---> Configuring gcc42 > ---> Building gcc42 with target all > > So all is going well until this line showed up and is taking absolute > age....what should I do? should I terminate it and try again? > Thanks > Chris > _______________________________________________ > macports-users mailing list > [EMAIL PROTECTED] > http://lists.macosforge.org/mailman/listinfo/macports-users Anfang der weitergeleiteten E-Mail: > Von: Ryan Schmidt <[EMAIL PROTECTED]> > Datum: 8. Mai 2008 12:36:34 MESZ > An: Christopher Choi <[EMAIL PROTECTED]> > Kopie: [EMAIL PROTECTED] > Betreff: Re: Gorm taking ages to compile? > > On May 8, 2008, at 04:08, Christopher Choi wrote: > >> I'm went to install Gorm from the ports by issuing the command >> sudo port >> install gorm...and it was going well until well its taking a whole >> night to >> do it, and its still doing the compilation of Gcc42... >> I have a Titanium G4 1GHz with 1Gb RAM so would that explain why >> its going >> so slowly? but I still don't get why installing Gorm an >> application can take >> such a long time.. >> >> this is what the compiling output is: >> >> Titan:~ Chris$ sudo port install gorm > > [snip] > >> ---> Building gcc42 with target all >> >> So all is going well until this line showed up and is taking absolute >> age....what should I do? should I terminate it and try again? > > gcc42 takes about 6 hours to compile on a 1.5 GHz PowerBook G4, so > on your 1 GHZ PowerBook G4 I would expect it to take about 9 hours. > You should also have at least 3GB of free hard drive space. > > I'm afraid gorm just has a lot of dependencies [1]. It will take > awhile to compile them all. > > > [1] http://www.ryandesign.com/tmp/gorm.png > > _______________________________________________ > macports-users mailing list > [EMAIL PROTECTED] > http://lists.macosforge.org/mailman/listinfo/macports-users _______________________________________________ Discuss-gnustep mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnustep _______________________________________________ Discuss-gnustep mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnustep
