On Tuesday, October 4, 2011 11:05 CEST, David Chisnall <[email protected]> wrote: > So, do you have tests that pass with gcc but fail with clang?
for -base, there is this failed build, which works with gcc, CLANG: 6436 Passed tests 17 Dashed hopes 1 Skipped set 1 Failed test 1 Failed file 1 Failed build GCC: 6428 Passed tests 17 Dashed hopes 1 Skipped set 1 Failed test 1 Failed file with gcc, it just doesn't run all the tests it runs with CLANG, but that is I guess due to the failed build. I used gcc-4.2.1 that comes with OpenBSD base installation. for -gui it looks like this: CLANG: 737 Passed tests 5 Failed tests GCC: 773 Passed tests <- since I did not cut n pasted, I may have accidently mixed up the last 7 and 3 I guess 5 Failed tests the 5 failed tests are the same. And the test that Fred says should not fail, has the same output: NSView_autoresize_and_rounding.m so its pretty much the same. Sebastian > > David > > On 4 Oct 2011, at 10:03, Sebastian Reitenbach wrote: > > > Hi, > > > > this is just to confirm, the numbers of the test results are not different > > whether using clang 2.9 or svn a.k.a 3.0. > > The only difference is that with gui I now have: > > 737 Passed tests > > 5 Failed tests > > but this is due to the lazy copy test, which failed with clang 2.9 because > > of not started gpbs. > > > > Now I'll recompile with clang and libobjc2, test results will follow. > > > > Sebastian > > > > > > On Tuesday, October 4, 2011 09:44 CEST, "Sebastian Reitenbach" > > <[email protected]> wrote: > > > >> Hi, > >> > >> here the gnustep-tests results from base and gui, compiled with clang 2.9. > >> clang 3.0 is also ready, these are just for reference and for comparison. > >> looks fairly similar to what gcc produced. One build failure of a -base > >> test > >> is strange, this did not happen with gcc. > >> > >> I was using the same svn revision like I did with gcc. > >> > >> Here the relevant parts of the -base tests: > >> > >> > >> 6436 Passed tests > >> 17 Dashed hopes > >> 1 Skipped set > >> 1 Failed test > >> 1 Failed file > >> 1 Failed build > >> > >> > >> > >> Testing initialize.m... > >> Running gnustep-base-1.23.1/Tests/base/NSObject/initialize.m... > >> Start set: initialize.m:128 ... +initialize > >> Passed test: initialize.m:133 ... initialize test starts > >> Failed test: initialize.m:139 ... inherited +initialize is called > >> automatically > >> 2011-10-04 09:05:13.022 initialize[17875] WARNING your program is becoming > >> multi-threaded, but you are using an ObjectiveC runtime library which does > >> not have a thre > >> ad-safe implementation of the +initialize method. Please see > >> README.initialize for more information. > >> Terminated > >> Failed file: initialize.m aborted without running all tests! > >> > >> > >> GNU gdb 6.3 > >> Copyright 2004 Free Software Foundation, Inc. > >> GDB is free software, covered by the GNU General Public License, and you > >> are > >> welcome to change it and/or distribute copies of it under certain > >> conditions. > >> Type "show copying" to see the conditions. > >> There is absolutely no warranty for GDB. Type "show warranty" for details. > >> This GDB was configured as "i386-unknown-openbsd5.0"... > >> Breakpoint 1 at 0x1c0046e0: file Testing.h, line 149. > >> (gdb) break -[NSException raise] > >> Function "-[NSException raise]" not defined. > >> Make breakpoint pending on future shared library load? (y or [n]) y > >> Breakpoint 2 (-[NSException raise]) pending. > >> (gdb) r > >> Starting program: > >> /home/ports/pobj/gnustep-base-1.23.1/gnustep-base-1.23.1/Tests/base/NSObject/obj/initialize > >> > >> Breakpoint 3 at 0x1004101: file NSException.m, line 956. > >> Pending breakpoint "-[NSException raise]" resolved > >> Start set: initialize.m:128 ... +initialize > >> Passed test: initialize.m:133 ... initialize test starts > >> [Switching to process 21264, thread 0x8b735000] > >> > >> Breakpoint 1, testStart () at Testing.h:149 > >> 149 } > >> Current language: auto; currently minimal > >> (gdb) bt > >> #0 testStart () at Testing.h:149 > >> #1 0x1c003488 in gnustep_base_user_main () at initialize.m:139 > >> #2 0x010ca627 in main (argc=1, argv=0xcfbd7734, env=0xcfbd773c) at > >> NSProcessInfo.m:979 > >> #3 0x1c0015d7 in ___start () > >> #4 0x1c001552 in _start () > >> (gdb) c > >> Continuing. > >> Failed test: initialize.m:139 ... inherited +initialize is called > >> automatically > >> 2011-10-04 08:58:31.700 initialize[21264] WARNING your program is becoming > >> multi-threaded, but you are using an ObjectiveC runtime library which does > >> not have a thread-safe implementation of the +initialize method. Please > >> see README.initialize for more information. > >> [New process 21264] > >> ^C > >> Program received signal SIGINT, Interrupt. > >> [Switching to process 21264] > >> 0x0c6d9379 in poll () from /usr/lib/libc.so.60.1 > >> (gdb) Quit > >> (gdb) bt > >> #0 0x0c6d9379 in poll () from /usr/lib/libc.so.60.1 > >> #1 0x0d396365 in _thread_kern_poll (wait_reqd=1) at > >> /usr/src/lib/libpthread/uthread/uthread_kern.c:782 > >> #2 0x0d397233 in _thread_kern_sched (scp=0x0) at > >> /usr/src/lib/libpthread/uthread/uthread_kern.c:383 > >> #3 0x0d39775f in _thread_kern_sched_state_unlock (state=PS_COND_WAIT, > >> lock=0x8978de98, fname=0x2d384e14 > >> "/usr/src/lib/libpthread/uthread/uthread_cond.c", > >> lineno=432) at /usr/src/lib/libpthread/uthread/uthread_kern.c:602 > >> #4 0x0d393ae7 in pthread_cond_timedwait (cond=0x2d386120, > >> mutex=0x2d38611c, abstime=0x81e7afc0) at > >> /usr/src/lib/libpthread/uthread/uthread_cond.c:431 > >> #5 0x0d38ebae in _thread_gc (arg=0x0) at > >> /usr/src/lib/libpthread/uthread/uthread_gc.c:181 > >> #6 0x0d38e5ce in _thread_start () at > >> /usr/src/lib/libpthread/uthread/uthread_create.c:242 > >> #7 0x0000002b in ?? () > >> #8 0x00000000 in ?? () > >> (gdb) c > >> Continuing. > >> Terminated > >> > >> > >> Making all for test_tool propertyAttrs... > >> Linking test_tool propertyAttrs ... > >> /usr/lib/libobjc.so.5.0: warning: strcpy() is almost always misused, > >> please use strlcpy() > >> /usr/local/lib/libgnustep-base.so.5.0: warning: sprintf() is often > >> misused, please use snprintf() > >> /usr/local/lib/libgmp.so.9.0: warning: vsprintf() is often misused, please > >> use vsnprintf() > >> /usr/local/lib/libgnutls.so.18.1: warning: strcat() is almost always > >> misused, please use strlcat() > >> ./obj/propertyAttrs.obj/propertyAttrs.m.o(.text+0x329): In function > >> `-[PropertyTest setStructDefault:]': > >> /home/ports/pobj/gnustep-base-1.23.1/gnustep-base-1.23.1/Tests/base/Functions/propertyAttrs.m:56: > >> undefined reference to `objc_setPropertyStruct' > >> ./obj/propertyAttrs.obj/propertyAttrs.m.o(.text+0x3c9): In function > >> `-[PropertyTest setTypedefDefault:]': > >> /home/ports/pobj/gnustep-base-1.23.1/gnustep-base-1.23.1/Tests/base/Functions/propertyAttrs.m:57: > >> undefined reference to `objc_setPropertyStruct' > >> ./obj/propertyAttrs.obj/propertyAttrs.m.o(.text+0x469): In function > >> `-[PropertyTest setUnionDefault:]': > >> /home/ports/pobj/gnustep-base-1.23.1/gnustep-base-1.23.1/Tests/base/Functions/propertyAttrs.m:58: > >> undefined reference to `objc_setPropertyStruct' > >> ./obj/propertyAttrs.obj/propertyAttrs.m.o(.text+0x96a): In function > >> `testProperty': > >> /home/ports/pobj/gnustep-base-1.23.1/gnustep-base-1.23.1/Tests/base/Functions/propertyAttrs.m:106: > >> undefined reference to `class_getProperty' > >> ./obj/propertyAttrs.obj/propertyAttrs.m.o(.text+0x9d1):/home/ports/pobj/gnustep-base-1.23.1/gnustep-base-1.23.1/Tests/base/Functions/propertyAttrs.m:113: > >> undefined r > >> eference to `property_getAttributes' > >> ./obj/propertyAttrs.obj/propertyAttrs.m.o(.text+0x9e9):/home/ports/pobj/gnustep-base-1.23.1/gnustep-base-1.23.1/Tests/base/Functions/propertyAttrs.m:114: > >> undefined r > >> eference to `property_getName' > >> ./obj/propertyAttrs.obj/propertyAttrs.m.o(.text+0xa20):/home/ports/pobj/gnustep-base-1.23.1/gnustep-base-1.23.1/Tests/base/Functions/propertyAttrs.m:115: > >> undefined r > >> eference to `property_getName' > >> clang: error: linker command failed with exit code 1 (use -v to see > >> invocation) > >> gmake[3]: *** [obj/propertyAttrs] Error 1 > >> gmake[2]: *** [internal-tool-all_] Error 2 > >> gmake[1]: *** [propertyAttrs.all.test-tool.variables] Error 2 > >> gmake: *** [propertyAttrs] Error 2 > >> Failed build: > >> > >> > >> > >> here the relevant parts of the -gui tests: > >> > >> 736 Passed tests > >> 6 Failed tests > >> > >> --- Running tests in gnustep-gui-0.21.0/Tests/gui/NSPasteboard --- > >> > >> gnustep-gui-0.21.0/Tests/gui/NSPasteboard/lazy_copy.m: > >> Failed test: NSPasteboard handles lazy setting of data > >> GNU gdb 6.3 > >> Copyright 2004 Free Software Foundation, Inc. > >> GDB is free software, covered by the GNU General Public License, and you > >> are > >> welcome to change it and/or distribute copies of it under certain > >> conditions. > >> Type "show copying" to see the conditions. > >> There is absolutely no warranty for GDB. Type "show warranty" for details. > >> This GDB was configured as "i386-unknown-openbsd5.0"... > >> /home/ports/pobj/gnustep-gui-0.21.0/gdb.cmds:1: Error in sourced command > >> file: > >> Undefined command: "Failed". Try "help". > >> (gdb) break -[NSException raise] > >> Function "-[NSException raise]" not defined. > >> Make breakpoint pending on future shared library load? (y or [n]) y > >> Breakpoint 1 (-[NSException raise]) pending. > >> (gdb) r > >> Starting program: > >> /home/ports/pobj/gnustep-gui-0.21.0/gnustep-gui-0.21.0/Tests/gui/NSPasteboard/obj/lazy_copy > >> > >> Breakpoint 2 at 0x9a65101: file NSException.m, line 956. > >> Pending breakpoint "-[NSException raise]" resolved > >> Passed test: NSPasteboard handles lazy setting of data > > > > I guess here I just had not gpbs running initially, and on the second try, > > it was available, I mean, triggered to start via the test. > > > > > > > >> > >> > >> > >> gnustep-gui-0.21.0/Tests/gui/NSSavePanel/setDelegate_reload.m: > >> Failed test: browser contains all files after resetting delegate > >> GNU gdb 6.3 > >> Copyright 2004 Free Software Foundation, Inc. > >> GDB is free software, covered by the GNU General Public License, and you > >> are > >> welcome to change it and/or distribute copies of it under certain > >> conditions. > >> Type "show copying" to see the conditions. > >> There is absolutely no warranty for GDB. Type "show warranty" for details. > >> This GDB was configured as "i386-unknown-openbsd5.0"... > >> /home/ports/pobj/gnustep-gui-0.21.0/gdb.cmds:1: Error in sourced command > >> file: > >> Undefined command: "Failed". Try "help". > >> (gdb) break -[NSException raise] > >> Function "-[NSException raise]" not defined. > >> Make breakpoint pending on future shared library load? (y or [n]) y > >> Breakpoint 1 (-[NSException raise]) pending. > >> (gdb) r > >> Starting program: > >> /home/ports/pobj/gnustep-gui-0.21.0/gnustep-gui-0.21.0/Tests/gui/NSSavePanel/obj/setDelegate_reload > >> > >> Breakpoint 2 at 0x8576101: file NSException.m, line 956. > >> Pending breakpoint "-[NSException raise]" resolved > >> 2011-10-04 09:21:30.971 setDelegate_reload[914] XShm not supported, > >> XShmAttach() failed. > >> 2011-10-04 09:21:30.973 setDelegate_reload[914] Falling back to normal > >> XImage (will be slower). > >> [New process 914] > >> Passed test: browser initially contains all files > >> Passed test: browser is reloaded after -setDelegate: > >> Failed test: browser contains all files after resetting delegate > >> Passed test: browser is reloaded after -setDelegate: (2) > >> > >> Program exited normally. > >> > >> > >> gnustep-gui-0.21.0/Tests/gui/NSView/NSView_autoresize_and_rounding.m: > >> Failed test: NSView autoresizing works > >> Failed test: NSView autoresize rounding works > >> GNU gdb 6.3 > >> Copyright 2004 Free Software Foundation, Inc. > >> GDB is free software, covered by the GNU General Public License, and you > >> are > >> welcome to change it and/or distribute copies of it under certain > >> conditions. > >> Type "show copying" to see the conditions. > >> There is absolutely no warranty for GDB. Type "show warranty" for details. > >> This GDB was configured as "i386-unknown-openbsd5.0"... > >> /home/ports/pobj/gnustep-gui-0.21.0/gdb.cmds:1: Error in sourced command > >> file: > >> Undefined command: "Failed". Try "help". > >> (gdb) break -[NSException raise] > >> Function "-[NSException raise]" not defined. > >> Make breakpoint pending on future shared library load? (y or [n]) y > >> Breakpoint 1 (-[NSException raise]) pending. > >> (gdb) r > >> Starting program: > >> /home/ports/pobj/gnustep-gui-0.21.0/gnustep-gui-0.21.0/Tests/gui/NSView/obj/NSView_autoresize_and_rounding > >> > >> Breakpoint 2 at 0xa132101: file NSException.m, line 956. > >> Pending breakpoint "-[NSException raise]" resolved > >> 2011-10-04 09:25:11.121 NSView_autoresize_and_rounding[7781] XShm not > >> supported, XShmAttach() failed. > >> 2011-10-04 09:25:11.123 NSView_autoresize_and_rounding[7781] Falling back > >> to normal XImage (will be slower). > >> (1) expected frame (10 10)+(10 10), got (10 10)+(9 10) > >> Failed test: NSView autoresizing works > >> Passed test: NSView autoresizing corner cases work > >> (1) expected frame (10 10)+(10 10), got (9 9)+(9 9) > >> Failed test: NSView autoresize rounding works > >> > >> Program exited normally. > >> > >> > >> gnustep-gui-0.21.0/Tests/gui/NSView/NSView_bounds_scale.m: > >> Failed test: NSView -scaleUnitSquareToSize works > >> GNU gdb 6.3 > >> Copyright 2004 Free Software Foundation, Inc. > >> GDB is free software, covered by the GNU General Public License, and you > >> are > >> welcome to change it and/or distribute copies of it under certain > >> conditions. > >> Type "show copying" to see the conditions. > >> There is absolutely no warranty for GDB. Type "show warranty" for details. > >> This GDB was configured as "i386-unknown-openbsd5.0"... > >> /home/ports/pobj/gnustep-gui-0.21.0/gdb.cmds:1: Error in sourced command > >> file: > >> Undefined command: "Failed". Try "help". > >> (gdb) break -[NSException raise] > >> Function "-[NSException raise]" not defined. > >> Make breakpoint pending on future shared library load? (y or [n]) y > >> Breakpoint 1 (-[NSException raise]) pending. > >> (gdb) r > >> Starting program: > >> /home/ports/pobj/gnustep-gui-0.21.0/gnustep-gui-0.21.0/Tests/gui/NSView/obj/NSView_bounds_scale > >> > >> Breakpoint 2 at 0x2ccb101: file NSException.m, line 956. > >> Pending breakpoint "-[NSException raise]" resolved > >> 2011-10-04 09:28:50.611 NSView_bounds_scale[17911] XShm not supported, > >> XShmAttach() failed. > >> 2011-10-04 09:28:50.613 NSView_bounds_scale[17911] Falling back to normal > >> XImage (will be slower). > >> expected bounds rotation 30 got 30.9153 > >> (2) expected bounds (39.9801 104.211)+(66.2393 85.2544), got (40.372 > >> 105.364)+(66.8473 84.9812) > >> expected bounds matrix (2.93813 0.614059 -1.69633 1.06358 104.31 -131.062) > >> got (2.96586 0.574951 -1.71234 1.07291 104.31 -131.062) > >> (2) expected bounds (39.9801 104.211)+(66.2393 85.2544), got (40.372 > >> 105.364)+(66.8473 84.9812) > >> expected bounds rotation 30 got 30.9153 > >> Failed test: NSView -scaleUnitSquareToSize works > >> > >> > >> gnustep-gui-0.21.0/Tests/gui/NSView/NSView_visibleRect.m: > >> Failed test: NSView -visibleRect works > >> GNU gdb 6.3 > >> Copyright 2004 Free Software Foundation, Inc. > >> GDB is free software, covered by the GNU General Public License, and you > >> are > >> welcome to change it and/or distribute copies of it under certain > >> conditions. > >> Type "show copying" to see the conditions. > >> There is absolutely no warranty for GDB. Type "show warranty" for details. > >> This GDB was configured as "i386-unknown-openbsd5.0"... > >> /home/ports/pobj/gnustep-gui-0.21.0/gdb.cmds:1: Error in sourced command > >> file: > >> Undefined command: "Failed". Try "help". > >> (gdb) > >> (gdb) break -[NSException raise] > >> Function "-[NSException raise]" not defined. > >> Make breakpoint pending on future shared library load? (y or [n]) y > >> Breakpoint 1 (-[NSException raise]) pending. > >> (gdb) r > >> Starting program: > >> /home/ports/pobj/gnustep-gui-0.21.0/gnustep-gui-0.21.0/Tests/gui/NSView/obj/NSView_visibleRect > >> > >> Breakpoint 2 at 0xa337101: file NSException.m, line 956. > >> Pending breakpoint "-[NSException raise]" resolved > >> Failed test: NSView -visibleRect works > >> > >> Program exited normally. > >> > >> > >> > >> > >> > >> > >> > >> _______________________________________________ > >> Discuss-gnustep mailing list > >> [email protected] > >> https://lists.gnu.org/mailman/listinfo/discuss-gnustep > > > > > > > > > > > > _______________________________________________ > > Discuss-gnustep mailing list > > [email protected] > > https://lists.gnu.org/mailman/listinfo/discuss-gnustep > > -- > This email complies with ISO 3103 > _______________________________________________ Discuss-gnustep mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnustep
