On 10/21/2011 10:47 AM, David Rosenstrauch wrote: > On 10/21/2011 10:39 AM, Jerry Feldman wrote: >> I have a system that has been having heat problems. (Apparently when >> it was >> in my boss' home, he replaced the existing cooling fans with whimpy >> ones, >> but he kept the original fans so yesterday we did replace them, but I >> would >> like to be able to monitor the temps. >> CPU2: Thermal monitoring enabled (TM1) >> >> But, I don't have any ACPI support: /proc/acip/thermal_zone is empty. >> I'm looking for a quick and dirty way to check to see if the unit >> temps are No sensors found! >> Make sure you loaded all the kernel drivers you need. >> Try sensors-detect to find out which these are. >> >> ok since this system is our Oracle server. >> >> Currently the system only has the 4 original cooling fans, but not the >> exhaust fans. I have some email to Supermicro on this if we need to >> get the >> exhaust fans. >> >> But, I'd like a way that I can look for issues not only on this >> server but >> my other devices. I actually noticed the heat issue the other day >> when the >> CPU throttled down because I had a terminal open on that system. > > I usually use lm_sensors to monitor for heat: > > [darose@daroselin ~]$ sensors > acpitz-virtual-0 > Adapter: Virtual device > temp1: +62.0°C (crit = +97.0°C) > > Unfortunately: No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. I did run sensors-detect as root, and it installed lm_sensors in /etc/sysconfig.
-- Jerry Feldman <[email protected]> Boston Linux and Unix PGP key id:3BC1EB90 PGP Key fingerprint: 49E2 C52A FC5A A31F 8D66 C0AF 7CEA 30FC 3BC1 EB90 _______________________________________________ Discuss mailing list [email protected] http://lists.blu.org/mailman/listinfo/discuss
