On 10/24/2014 17:48, Alexander Pyhalov via illumos-discuss wrote:
Hello.
...
Any ideas what could go wrong? I suppose that it could be just data
corruption (but why?). Of course, I can just recreate the data pool and
send/recv data from physical server to VM, but the whole panic looks
strange. I mean, why data corruption could happen?
I suppose, the difference is the following. root pool was created over
first partition of the disk. And data pool was created on the whole "disk":
$ zpool status
pool: data
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not
support
the features. See zpool-features(5) for details.
scan: none requested
config:
NAME STATE READ WRITE CKSUM
data ONLINE 0 0 0
c4t6005076802808844B000000000000032d0 ONLINE 0 0 0
errors: No known data errors
pool: rpool
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not
support
the features. See zpool-features(5) for details.
scan: none requested
config:
NAME STATE READ WRITE
CKSUM
rpool ONLINE 0 0
0
c4t6005076802808844B000000000000031d0s0 ONLINE 0 0
0
--
Best regards,
Alexander Pyhalov,
system administrator of Southern Federal University IT department
-------------------------------------------
illumos-discuss
Archives: https://www.listbox.com/member/archive/182180/=now
RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be
Modify Your Subscription:
https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4
Powered by Listbox: http://www.listbox.com
