Hello.
I'm trying to move OI Hipster host from physical host to linux-hosted kvm.
The host has two pools, each consisting from one disk.
$ zpool status
pool: data
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not
support
the features. See zpool-features(5) for details.
scan: scrub repaired 0 in 4h5m with 0 errors on Tue Oct 28 13:58:26 2014
config:
NAME STATE READ WRITE CKSUM
data ONLINE 0 0 0
c4t6005076802808844B000000000000032d0 ONLINE 0 0 0
errors: No known data errors
pool: rpool
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not
support
the features. See zpool-features(5) for details.
scan: none requested
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
c4t6005076802808844B000000000000031d0s0 ONLINE 0 0 0
errors: No known data errors
The disks are in fact LUNs provided by our IBM storage.
I've dd-ed LUN, corresponding to rpool ZFS pool to LVM volume. Added
this volume to KVM VM and could boot with it.
But the same doesn't work for data pool. After going up, VM says that
data pool is corrupted. So I mapped LUN, corresponding to data pool, to
KVM host and added it as raw device to KVM host and gave it to VM.
In kvm command line I have:
-drive
file=/dev/mapper/mpathf,if=none,id=drive-ide1,aio=native,cache=none
-device ide-hd,bus=ide.0,unit=1,drive=drive-ide1,id=ide1
where mpathf is LUN, corresponding to
c4t6005076802808844B000000000000032d0.
But when I boot VM, it again says that data pool is corrupted:
# zpool import
pool: data
id: 18026850962074001314
state: FAULTED
status: The pool metadata is corrupted.
action: The pool cannot be imported due to damaged devices or data.
The pool may be active on another system, but can be imported using
the '-f' flag.
see: http://illumos.org/msg/ZFS-8000-72
config:
data FAULTED corrupted data
c10d1 ONLINE
I've already run scrub on data pool, connected to physical server. It
hasn't found anything special. But I just can't connect this pool to VM.
Does someone know, what is going on?
--
Best regards,
Alexander Pyhalov,
system administrator of Southern Federal University IT department
-------------------------------------------
illumos-discuss
Archives: https://www.listbox.com/member/archive/182180/=now
RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be
Modify Your Subscription:
https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4
Powered by Listbox: http://www.listbox.com
