Oh I didnt catch that detail. Okay well nevermind :)
Sent from Outlook Mobile<https://aka.ms/qtex0l> On Tue, Jan 12, 2016 at 8:21 PM -0800, "Brian Hechinger" <wo...@4amlunch.net<mailto:wo...@4amlunch.net>> wrote: In my case the SATA disks aren’t on the 1068E. -brian On Jan 12, 2016, at 11:19 PM, John Barfield <john.barfi...@bissinc.com<mailto:john.barfi...@bissinc.com>> wrote: BTW I left off that it has the same LSI controller chipset Sent from Outlook Mobile<https://aka.ms/qtex0l> _____________________________ From: John Barfield <john.barfi...@bissinc.com<mailto:john.barfi...@bissinc.com>> Sent: Tuesday, January 12, 2016 10:17 PM Subject: Re: [OmniOS-discuss] [discuss] COMSTAR hanging To: <disc...@lists.illumos.org<mailto:disc...@lists.illumos.org>>, omnios-discuss <omnios-disc...@lists.omniti.com<mailto:omnios-disc...@lists.omniti.com>> My input may or may not be valid but Im going to throw it out there anyway :) do you have any Mpt disconnect errors in /var/adm/messages? Also do you have smartmontools installed? I ran into similiar issues just booting a sunfire x4540 recently off of OmniOS live, i/o would just hang while probing device nodes. I found the drive that was acting up and pulled it. All of a sudden everything miraculously worked amazing. I compiled smartmontools after I got it to boot and found 10 drives out of 48 with bad sectors in prefail state. I dont know if this happens with SAS drives or not but Im using SATA and saw this was a common issue in old opensolaris threads. -barfield Sent from Outlook Mobile<https://aka.ms/qtex0l> On Tue, Jan 12, 2016 at 8:08 PM -0800, "Brian Hechinger" <wo...@4amlunch.net<mailto:wo...@4amlunch.net>> wrote: In the meantime I’ve removed the SLOG and L2ARC just in case. I don’t think that’s it though. At least will have some sort of data point to work with here. :) -brian > On Jan 12, 2016, at 10:55 PM, Brian Hechinger > <wo...@4amlunch.net<mailto:wo...@4amlunch.net>> wrote: > > Ok, it has happened. > > Checking this here, the pool seems to be fine. I can read and write files. > > except ‘zpool status’ is now currently hanging. I can still read/write from > the pool, however. > > I can telnet to port 3260, but restarting target services has hung. > > root@basket1:/tank/Share# svcs -a | grep stmf > online Jan_05 svc:/system/stmf:default > root@basket1:/tank/Share# svcs -a | grep target > disabled Jan_05 svc:/system/fcoe_target:default > online Jan_05 svc:/network/iscsi/target:default > online Jan_05 svc:/system/ibsrp/target:default > root@basket1:/tank/Share# svcadm restart /system/ibsrp/target > root@basket1:/tank/Share# svcadm restart /network/iscsi/target > root@basket1:/tank/Share# svcadm restart /system/stmf > root@basket1:/tank/Share# svcs -a | grep target > disabled Jan_05 svc:/system/fcoe_target:default > online* 22:43:03 svc:/system/ibsrp/target:default > online* 22:43:13 svc:/network/iscsi/target:default > root@basket1:/tank/Share# svcs -a | grep stmf > online* 22:43:18 svc:/system/stmf:default > root@basket1:/tank/Share# > > I’m doing a crash dump reboot. I’ll post the output somewhere. > > The output of echo '$<threadlist' | mdb -k is attached. > > <threadlist.out> > >> On Jan 8, 2016, at 3:11 PM, Matej Zerovnik >> <ma...@zunaj.si<mailto:ma...@zunaj.si>> wrote: >> >> Is the pool usable during comstar hang? >> Can you write and read from the pool (test both, in my case, when pool >> froze, I wasn’t able to write to the pool, but I could read). >> >> Again, this might not be connected with Comstar, but in my case, Comstar and >> pool hang were exchanging. >> >> Matej >> >>> On 08 Jan 2016, at 20:11, Brian Hechinger >>> <wo...@4amlunch.net<mailto:wo...@4amlunch.net>> wrote: >>> >>> Yeah, I’m using the 1068E to boot from (this has been supported since >>> before Illumos) but that doesn’t have anything accessed by COMSTAR. >>> >>> It’s the ICH10R SATA that hosts the disks that COMSTAR shares out space >>> from. >>> >>> -brian >>> >>>> On Jan 8, 2016, at 1:31 PM, Richard Jahnel >>>> <rjah...@ellipseinc.com<mailto:rjah...@ellipseinc.com>> wrote: >>>> >>>> First off, love SuperMicro good choice IMHO. >>>> >>>> This board has two on board controllers. >>>> >>>> LSI SAS1068E (not 100% sure there are working illumos drivers for this one) >>>> >>>> And >>>> >>>> Intel ICH10R SATA (So I'm guessing your using this one.) >>>> >>>> -----Original Message----- >>>> From: OmniOS-discuss [ mailto:omnios-discuss-boun...@lists.omniti.com] On >>>> Behalf Of Brian Hechinger >>>> Sent: Friday, January 08, 2016 12:16 PM >>>> To: Matej Zerovnik <ma...@zunaj.si<mailto:ma...@zunaj.si>> >>>> Cc: omnios-discuss >>>> <omnios-disc...@lists.omniti.com<mailto:omnios-disc...@lists.omniti.com>> >>>> Subject: Re: [OmniOS-discuss] [discuss] COMSTAR hanging >>>> >>>> >>>>> Which controller exactly do you have? >>>> >>>> Whatever ACHI stuff is built into the motherboard. Motherboard is X8DTL-3F. >>>> >>>>> Do you know firmware version? >>>> >>>> I’m assuming this is linked to the BIOS version? >>>> >>>>> Which hard drives? >>>> >>>> Hitachi-HUA723030ALA640-MKAOAA50-2.73TB >>>> >>>>> It might not tell much, but it’s good to have as much information as >>>>> possible. >>>>> >>>>> When comstar hangs, can you telnet to the iSCSI port? >>>>> What does svcs says, is the service running? >>>>> What happens in you try to restart it? >>>>> How do you restart it? >>>> >>>> I’ll try all these things next time. >>>> >>>>> In my case, svcs reported service running, but when I tried to telnet, >>>>> there was no connection as well as there was no listening port opened >>>>> when checking with 'netstat -an'. If I tried to restart target and stmf >>>>> service, but stmf service got stucked in online* state and would not >>>>> start. Reboot was the only solution in my case, but as I said, latest 014 >>>>> release is working OK (but then again, load got reduced). >>>> >>>> All good info. Thanks! >>>> >>>> -brian >>>> >>>>> >>>>> Matej >>>>> >>>>>> On 08 Jan 2016, at 17:50, Dave Pooser >>>>>> <dave...@pooserville.com<mailto:dave...@pooserville.com>> wrote: >>>>>> >>>>>>>> On Jan 8, 2016, at 11:22 AM, Brian Hechinger >>>>>>>> <wo...@4amlunch.net<mailto:wo...@4amlunch.net>> wrote: >>>>>>>> >>>>>>>> No, ZFS raid10 >>>>>>> >>>>>>> Saw the HW-RAID term, and got concerned. That's what, raidz2 in >>>>>>> ZFS-ese? >>>>>> >>>>>> It's a zpool with multiple mirror vdevs. >>>>>> >>>>>> -- >>>>>> Dave Pooser >>>>>> Cat-Herder-in-Chief, Pooserville.com<http://pooserville.com> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> OmniOS-discuss mailing list >>>>>> omnios-disc...@lists.omniti.com<mailto:omnios-disc...@lists.omniti.com> >>>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss >>>>> >>>>> _______________________________________________ >>>>> OmniOS-discuss mailing list >>>>> omnios-disc...@lists.omniti.com<mailto:omnios-disc...@lists.omniti.com> >>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss >>>> >>>> _______________________________________________ >>>> OmniOS-discuss mailing list >>>> omnios-disc...@lists.omniti.com<mailto:omnios-disc...@lists.omniti.com> >>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss >>> >> > http://www.listbox.com<http://www.listbox.com/> illumos-discuss | Archives<https://www.listbox.com/member/archive/182180/=now> [https://www.listbox.com/images/feed-icon-10x10.jpg044d385.jpg?uri=aHR0cHM6Ly93d3cubGlzdGJveC5jb20vaW1hZ2VzL2ZlZWQtaWNvbi0xMHgxMC5qcGc] <https://www.listbox.com/member/archive/rss/182180/26677440-40b316d8> | Modify<https://www.listbox.com/member/?&;> Your Subscription [https://www.listbox.com/images/listbox-logo-small.png044d385.png?uri=aHR0cHM6Ly93d3cubGlzdGJveC5jb20vaW1hZ2VzL2xpc3Rib3gtbG9nby1zbWFsbC5wbmc] <http://www.listbox.com/> _______________________________________________ OmniOS-discuss mailing list omnios-disc...@lists.omniti.com<mailto:omnios-disc...@lists.omniti.com> http://lists.omniti.com/mailman/listinfo/omnios-discuss ------------------------------------------- illumos-discuss Archives: https://www.listbox.com/member/archive/182180/=now RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be Modify Your Subscription: https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4 Powered by Listbox: http://www.listbox.com
