Thanks, it was jbod mode ;) pure zfs raid. I'll check that board. Gabriele. ---------------------------------------------------------------------------------- Da: Bob Friesenhahn A: [email protected] Data: 17 gennaio 2013 17.23.28 CET Oggetto: Re: [discuss] supported SAS Adapter substituting failing Adaptec On Thu, 17 Jan 2013, Gabriele Bulfon wrote: following a previous discussion where I had failures on a zpool running over an Adaptec SAS adapter, I'm in the process of changing this adapter with another brand. The other adapter running perfectly on the machine, is an Areca one. I thought to get another Areca, but I found it very expensive. What adapter would you suggest in change of the failing Adaptec SAS adapter? The LSI 9211-8i (and related) are very successful with Solaris when run in IT mode and they are reasonably priced. However, the first thing to determine if is if your Adaptec SAS adapter was run in an IT native-LUN mode ("jbod") or if it was run in a RAID mode which modified the data in a way proprietary to the adaptor (hopefully the former). Bob -- Bob Friesenhahn [email protected], http://www.simplesystems.org/users/bfriesen/ GraphicsMagick Maintainer, http://www.GraphicsMagick.org/ ------------------------------------------- illumos-discuss Archives: https://www.listbox.com/member/archive/182180/=now RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175541-02f10c6f Modify Your Subscription: https://www.listbox.com/member/?&id;secret=21175541-29e3e0ee Powered by Listbox: http://www.listbox.com
------------------------------------------- illumos-discuss Archives: https://www.listbox.com/member/archive/182180/=now RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be Modify Your Subscription: https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4 Powered by Listbox: http://www.listbox.com
