On 2/18/23 03:44, Elima wrote: > Thanks! > > This is it: > > T: Bus=01 Lev=02 Prnt=12 Port=03 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=058f ProdID=6366 Rev= 1.00 > S: Manufacturer=Generic > S: Product=Flash Card Reader/Writer > S: SerialNumber=058F63666438 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbfs > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > lsusb > Bus 001 Device 006: ID 046a:000c Cherry GmbH USB Optical Mouse > Bus 001 Device 005: ID 046a:0011 Cherry GmbH G83 (RS 6000) Keyboard > Bus 001 Device 003: ID 04b3:4485 IBM Corp. ThinkPad Dock Hub > Bus 001 Device 015: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader > Bus 001 Device 014: ID 1a40:0101 Terminus Technology Inc. Hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Thanks for sharing that, so this all looks like it's expected to show up as a normal USB mass storage device. So there are two things I would probably confirm: * When you plug in the device, we should get a confirmation that the USB device was detected and the scsa2usb driver is present. * You mentioned that when you plug in the reader the SD card is already present. That's probably going to be required. I'd also see if there are any errors from scsa2usb attaching that show up in the message log or not. Robert ------------------------------------------ illumos: illumos-discuss Permalink: https://illumos.topicbox.com/groups/discuss/Tcea93d6f16feca72-Me1aa8ff1b5d52903dfb024d2 Delivery options: https://illumos.topicbox.com/groups/discuss/subscription
