Thanks Dimitris, this worked flawlessly. The documentation needs to more clearly state that the trancoding server and the video server should be the same. I definitely wasted quite a few hours being stupid about this.
Also, in my experience, the documentation should also point out that for the initial set up you need to modify the zope.conf file and change address from 127.0.0.1;8080 to example.org:8080 . This may not be true in all situations, but it cost me a couple of hours as well. I'll give a full write up of my experience soon. thanks again, ross [email protected] writes: > Message: 2 > Date: Thu, 13 May 2010 17:09:05 +0300 > From: Dimitris Moraitis <[email protected]> > To: Discussion about software development on Plumi > <[email protected]> > Subject: Re: [plumi-discuss] Transcoding Path Problem Update > Message-ID: <[email protected]> > Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes > > Hey Ross, > > On May 13, 2010, at 9:09 AM, Ross Glover wrote: > >> Hi All, >> >> So it seems that my problem is not uncommon, perhaps endemic? Looking >> at the demo site, I see the same problem that I'm having. Is there a >> fix for this? >> >> http://demo.plumi.org/Members/datakid/videos/house_of_cosbys_5.mp4/ >> view >> >> It throws the same 200, stream not found error. > > The problem for demo.plumi.org was that for some reason the transcode > daemon was not running on videos.demo.plumi.org as it should. Just > fixed it. > >> >> The problem may not be with transcoding at all, but simply how the >> path is build or followed. I am, nonetheless, mega-perplexed as >> this is my first time using zope, plone, and plumi. It appears, as >> far >> as I can tell, that the default installation does not read standard >> url >> paths? > > From what I can see transcode daemon is running fine at > http://transcode.debord.mayfirst.org > > Have you configured the plumi properties in the > http://video.debord.mayfirst.org/portal_properties/plumi_properties/manage_propertiesForm > > The transcode daemon and video server address should be > http://transcode.debord.mayfirst.org > The plonesite address should be http://video.debord.mayfirst.org > > Also make sure that you have set the correct admin user and password > there. This requirement should be removed in the next plumi versions. > >> Anyway, this is all quite confusing to a Drupaler. If anyone could >> offer suggestions for me and/or the demo site... > > I think by making the above changes it should work. > > Cheers, > Dimitris > > > -- Sent from an Emacs buffer. _______________________________________________ Discuss mailing list [email protected] http://lists.plumi.org/listinfo/discuss
