Hi Markos,
tnx for answering!
On 05/21/2013 03:30 PM, Markos Gogoulos wrote:
Hi Simone,
I remember getting "Authentication failed" and a restart of the
worker/ploneftp was enough to fix the issue. You don't have to install
anything extra, the files to check are the config.py you've pasted,
make sure that the path reflects the name you gave for your portal (in
case you created a plumi site with id Plone for example, then use path
= "/Plone/Members/%s/videos").
I double checked the plonesite name and the credentials: http login works.
I tried to change zope_ftp_address to 0.0.0.0:8021 and also to use zope
admin/admin credentials to login via FTP: no way. Same error:
[]127.0.0.1:60378 Connected.
127.0.0.1:60378 ==> 220 pyftpdlib 0.7.0 ready.
127.0.0.1:60378 <== USER admin
127.0.0.1:60378 ==> 331 Username ok, send password.
127.0.0.1:60378 <== PASS ******
authenticating to Zope FTP server
0.0.0.0:8021 with username admin
Error authenticating to Zope FTP server
0.0.0.0:8021 with username admin : [Errno
111] Connection refused
127.0.0.1:60378 ==> 530 Authentication failed.
[]@127.0.0.1:60378 Disconnected.
ZopeHandler got a closed connection
I would expect zope admin to work.... :(
I checked FTP permissions into zope's security tab and they are ok, my
user is manager, anyway.
What can I do for better debugging this beside stepping with pdb on
every line of code?
Hope this helps!
Regards,
Markos
On Fri, May 17, 2013 at 12:15 PM, Simone Orsi <[email protected]
<mailto:[email protected]>> wrote:
Hi,
I'm trying to use FTP upload on my local machine. I have a
'manager' user on localhost:8082/plumi.
My parts/ploneftp/config.py looks like:
tmp_dir = "/path/to/plumi/buildout/var/ploneftp"
zope_ftp_address = "127.0.0.1:8021 <http://127.0.0.1:8021>"
address = "*:21"
login_message = "Welcome to Plone FTP. Your uploaded file may not
be visible in FTP when the upload has finished. Go to your Plone
site member folder to see your file."
logout_message = "Thanks for using Plone FTP!"
path = "/plumi/Members/%s/videos"
In filezilla log I see:
Status: Resolving address of localhost
Status: Connecting to 127.0.0.1:21...
Status: Connection established, waiting for welcome message...
Response: 220 pyftpdlib 0.7.0 ready.
Command: USER manager
Response: 331 Username ok, send password.
Command: PASS *****
Response: 530 Authentication failed.
Error: Critical error
Error: Could not connect to server
And, ftp running in fg says:
Starting FTP server
[]127.0.0.1:39154 <http://127.0.0.1:39154> Connected.
127.0.0.1:39154 <http://127.0.0.1:39154> ==> 220 pyftpdlib 0.7.0
ready.
127.0.0.1:39154 <http://127.0.0.1:39154> <== USER manager
127.0.0.1:39154 <http://127.0.0.1:39154> ==> 331 Username ok, send
password.
127.0.0.1:39154 <http://127.0.0.1:39154> <== PASS ******
authenticating to Zope FTP server 127.0.0.1:8021
<http://127.0.0.1:8021> with username manager
Error authenticating to Zope FTP server 127.0.0.1:8021
<http://127.0.0.1:8021> with username manager : [Errno
111] Connection refused
127.0.0.1:39154 <http://127.0.0.1:39154> ==> 530 Authentication
failed.
[]@127.0.0.1:39154 <http://127.0.0.1:39154> Disconnected.
ZopeHandler got a closed connection
BTW I also installed 'plumiftp' but I don't know if still needed
since is not reported into buildout.
Am I doing something wrong? Or simply I'm missing some flag to be
turned on?
Tnx,
S.
_______________________________________________
Discuss mailing list
[email protected] <mailto:[email protected]>
http://lists.plumi.org/listinfo/discuss
--
https://unweb.me
state of the art information systems
_______________________________________________
Discuss mailing list
[email protected]
http://lists.plumi.org/listinfo/discuss
