Of course you can do that, I didn't even discuss in my post how to statically address the PCs with an IP for DNS resolutions and default gateway.
I guess the bottom line is, if you don't understand static IP addressing it's probably best not to mess with it (you might become very frustrated). > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Daniel Cohen > Sent: Thursday, March 03, 2005 9:27 AM > To: Slim Devices Discussion > Subject: RE: [slim] WRT54G and static IPs > > On 3/3/05 at 7:39 am -0700, Jason wrote > >Static addressing consists of turning off the DHCP feature > and manually > >assigning addresses in the same subnet as the router interface. > > > >If the router interface is 192.168.15.1 with a subnet mask of > >255.255.255.0 then you can statically asign anything from > 192.168.15.2 > >through > >192.168.15.254 > > But, depending on the router, there is the possibility of > combining both. My router, for instance, under DHCP Server > Configuration has a Start IP Address that van be set, and is > currently 192.168.1.10, which presumably would allow one (but > from the computers, not the > router) to assign addresses in the range 192.168.1.2 to 192.168.1.9 > -- > Daniel Cohen > _______________________________________________ > Discuss mailing list > [email protected] > http://lists.slimdevices.com/lists/listinfo/discuss > _______________________________________________ Discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
