I've found quite a difference between cheap cables in terms on bandwidth when looked at on a scope for rounding of the signal - it could be that the cable shiped with the Rotel is not too hot?
Adrian
----- Original Message ----- From: "Sean Adams" <[EMAIL PROTECTED]>
To: "Slim Devices Discussion" <[email protected]>
Sent: Saturday, April 02, 2005 2:57 AM
Subject: Re: [slim] Rotel RSX1056
Safe, yes. I've already figured out the problem is just that the waveform is not quite as sharp as the rotel wants it. This is really simple to fix by changing the ferrite filter on the output, but there is a tradeoff between slew rate and EMI output. Therefore before I can offer a fix I have to have it tested and approved by our lab.
More details coming in a few days - you'll need to send your unit in if you need the fix. Otherwise please use the optical or analog outputs as a workaround.
On Apr 1, 2005, at 5:31 PM, Phillip Kerman wrote:
By the way, I can repeat it every time---guess how? I switch an outside light on/off... and my receiver loses the loc on the DAC signal. My SB2 and receiver are plugged into a "brickwall" MOV or similar. The light switch is maybe on the same circuit.
Is this thing safe?
Thanks, Phillip
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sean Adams Sent: Thursday, March 31, 2005 3:39 PM To: Slim Devices Discussion Subject: Re: [slim] Rotel RSX1056
I think I am reproducing this now - going to take some time to figure out what's going on.
On Mar 31, 2005, at 2:34 PM, Phillip Kerman wrote:
errors. StillKevin tried several coax cables of various length and quality but could not reproduce any loss-of-sync problem or obvious datafirmwaretesting though.
What happens when you do it coax only? I get the receiver to freak out--not only no sound but it keeps trying different decoding types (various noise reduction types it supports).
Granted, of all my issues, the loss of sync is the most intermittent... and hasn't occurred since I installed the latest firmware (SB 2that is).
Thanks, Phillip
_______________________________________________ Discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
_______________________________________________ Discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
_______________________________________________ Discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
_______________________________________________
Discuss mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/discuss
_______________________________________________ Discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
