Snowflake Wrote: > No. Never died while playing music. Never fails that as soon as I report this, that's exactly what happened. This morning while I was eating breakfast, the music stopped. I looked over at the SB2 to see "connecting to wireless network" on the screen. No countdown, no name of my wireless access point showing. Same symptoms as the previous crashes, I ended up going through the setup again in order to get it to reconnect.
> I'll try this next time I see it. FYI, hitting the "up" or "down" arrows didn't do anything to help. I'll write down what it shows next time, I just didn't have a pen handy and I was trying to get out the door this AM or I would have written it down. I did try another suggestion above, which was to just scroll back to the menu and try and "accept" the current connection. I couldn't find that menu entry. I was able to view the current settings, and they are complete, with IP addresses, WEP codes, etc. But if I say "connect to wireless network", it just goes to the "connecting to wireless network" screen, stays there for a few seconds, and then goes back to the black screen. Perhaps this is significant: When I run through the complete setup, and it gets to the "connecting to wireless network" screen, it shows my wireless access point's name at the bottom of the screen, and a countdown on the right-hand-side. When it's come out of BSOD mode, it doesn't show the access point's name or the countdown. -- Snowflake _______________________________________________ Discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
