Andy,
It seems we are in separate timezones - you may get a faster response calling
slim support....
However assuming you want to continue.
1) IP address of the squeezebox is normally dynamically assigned using a protocol called DHCP. The most common case is for your
wireless router to give the squeezebox an address when it asks. Normally it gives the same one each time, but it could give a
different one.
2) We need to know what the IP address of the PC is that you are running slimserver on. I assume this is connected to the same
wireless router [probably over the wired
connection?] Do you have any other network devices in your network?
Could you paste here what:
"ipconfig /all" when types into a cmd window [see other post on cut and paste]
3) What connections exist between slimserver and the client [if any]
Could you paste the output of
"netstat -n" too
4) When you set up squeezebox, did you give it an IP address of slimserver to connect to, or did you let it try to detect
slimserver. Could I suggest you restart squeezebox, go though the setup process again and manually enter the IP address which
"ipconfig /all" showed for your server machine. Does this mean you see any more connections with "netstat -n"?
I assume by netstat output, you mean what shows up when I enter that
command? Stuff similar to what I posted on the first page of this
thread. The most recent one had four lines under "Active Connections."
The 9000 port is indicated but not the other two Slimserver ports.
Btw, is there any way to copy and paste what comes up in the DOS
screen? I'd like to show you directly.
BTW - all the previous netstat showed "local host" and "Mycomputer" as the addresses - i.e. the server is not seeing anything from
the squeezebox.
Adrian
_______________________________________________
Discuss mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/discuss
