If you just go thru the preferences menu and select what you want, it will persist. I do the same and route the output to my dummy (snd_dummy) interface. It always goes to that each time SoftSqueeze starts, no need to specify it each time.
-chris On 7/4/05, mctubster <[EMAIL PROTECTED]> wrote: > > I tried this, but now I dont get any sound out. > > I used -Daudio.mixer=plughw:1,0 > > The soundcard I want to use is soundcard1 > > **** List of PLAYBACK Hardware Devices **** > card 0: Live [Sound Blaster Live!], device 0: emu10k1 [EMU10K1] > Subdevices: 32/32 > Subdevice #0: subdevice #0 > Subdevice #1: subdevice #1 > > *******snip******** > > card 1: ICH5 [Intel ICH5], device 0: Intel ICH [Intel ICH5] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 1: ICH5 [Intel ICH5], device 4: Intel ICH - IEC958 [Intel ICH5 - > IEC958] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > Any other ideas, or obvious mistakes? > > Cheers > Steve > > > -- > mctubster > _______________________________________________ > Discuss mailing list > [email protected] > http://lists.slimdevices.com/lists/listinfo/discuss > _______________________________________________ Discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
