sdonham;333566 Wrote: > I will definitely downgrade this weekend to see if it fixes the issue > and I'll keep you posted. > > > It's plugged into all Parasound gear: Parasound 2125 amp, > Parasound 2100 preamp. The volume on the SB3 does not make any > difference on noise level of the high-pitched whine, the level on the > amp does, however. Is keeping the volume on the SB3 at max the > recommended output level? I tend to use the Jive (Slimcontroller) for > volume control, so it goes up and down.
IMHO you should set the loudest listening level you would ever use on the Parasound preamp and then adjust the (analogue) level down on the SB. YMMV. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal...SB3+Stontronics PSU - Altmann JISCO/UPCI - TACT RCS 2.2X + Good Vibrations S/W - MF Triplethreat(Audiocom full mods)- Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Kimber & Chord cables Outdoors: Boombox+Creative Sub (If I remember to turn it on...) ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=51579 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
