I have had a duet for about 3 months now, and recently added a SB3 into the mix. My Linksys A/G wireless router needed a factory reset, and I've had nothing but problems with the sb3 since then.
Little overview of my setup: I have a wireless usb adapter at the computer, the wireless router at the dsl connection, and 4 wireless devices, although at the most only two of them are active. This has worked almost flawlessly with the squeeze units. After reconfiguring the router for security, I first turned on the duet receiver in the bedroom, which is also the same room that the router is in. It had some stuttering, so I tried a different channel, and it worked like it should. I then tried the SB3, which is downstairs, and probably closer to the router than the duet receiver, but it does have a floor between them. No matter what I did, I could not get it to play without dropouts. I ended up hooking up my wireless A/G gaming adapter that I have, doing a reset so that I could select ethernet, and finally got it working that way. The one thing that I have noticed that is different, is the wireless icon in the windows shows a connection speed ranging from 48-54 mbps. Before the reset of the router, and after adding the Squeeze units, it was running in the 24-36 mbps, which I always figured the router was managing connection speeds to optimize bandwidth for all devices. Again, at those speeds, everything worked flawlessly. Any suggestions? I've tried different channels on the g network, but nothing seemed to make a difference. Rob -- HUEY ------------------------------------------------------------------------ HUEY's Profile: http://forums.slimdevices.com/member.php?userid=18205 View this thread: http://forums.slimdevices.com/showthread.php?t=53048 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
