Sorry if this is the wrong forum for this post -- there doesn't seem to
be a dedicated "network issues" forum, so I guess general is as good a
place as any.

I've discoved that plaster walls combined with the chimney running
through the middle of my house is not a friendly setup for WiFi.  Or,
at least it weakens the signals enough to cause problems for my SBC. 
In hopes of solving this, and to pave the way for getting WiFi out to
the deck for a future Boom, I picked up a Linksys wireless range
expander (WRE54G).  This is mated with my Linksys WRTP54G -- one of
their routers with VOIP built in.  Both are using the same SSID and
same WPA settings.  They see each other and life is grand.  

But not quite.  I had hoped that the WRE54G would just boost the signal
throughout the house.  But now I've come to understand (I think) that a
WiFi device such as the SBC attaches itself to a particular access
point.  So if I'm close to my router when I turn on the SBC, it links
itself to the router.  And similarly, if I'm close to the range
expander when I turn on the SBC, it links itself to the expander.  But
if I move from one side of the house to the other, the SBC doesn't roam
with me -- it holds on to that original (now very weak) connection.

Is there someway to make the SBC "wander" and grab the stronger access
point's signal as I move throughout the house?  If not automated, is
there a way to manually force the controller to reconnect to the other
AP without cycling the SBC's power?

One other quick note, I have version 3 of the WRE54g which does not
allow you to use a different SSID than the router's.  Older versions
allowed this, which could have been a potential (albeit messy)
solution, but no dice.

Any ideas?  Or am I doing something obviously wrong with this
configuration?

Thanks,
Andy


-- 
ajkidle
------------------------------------------------------------------------
ajkidle's Profile: http://forums.slimdevices.com/member.php?userid=18929
View this thread: http://forums.slimdevices.com/showthread.php?t=53798

_______________________________________________
discuss mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/discuss

Reply via email to