My SB3 often has trouble in reconnecting to SC (7.2) when cold booted. It seems to boot successfully but fails at the last step. I manually went through all the network config steps to verify that it was just the SC connect that was the issue.
However from the SC PC itself I was surprised to find that I couldn't ping the SB3 on the address that it said it had obtained. I dug a little deeper and "arp -a" showed that the ip address was indeed mapped to the SB3's MAC address but ping still didn't work. I moved the SB3 next to the wireless router with no change. Finally I tried rebooted the wireless router (Linksys WRT54GX-v2 firmware 2.00.20) even though other wireless devices were working, and suddenly the SB3 connected to SC just fine. It is also pingable. Any ideas what went wrong? I really don't think that it's just the router that's at fault here. -- mr-b ------------------------------------------------------------------------ mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044 View this thread: http://forums.slimdevices.com/showthread.php?t=54264 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
