davidmac27;354112 Wrote: > I am pretty sure they have a bug. Many times I have done a hard reset > on the receiver (hold button in until red flashes fast) and then also > did a factory reset on the remote. It starts up and I choose English > and then it searches for networks and gives me the option to connect > using Ethernet or wifi. I choose Ethernet and then the setup proceeds > to continue as if I selected wifi. > > I have probably hard reset both 50 times... (It sounds as if you have already done this, but just to be sure: you need to do a full reset of the receiver - hold button till it flashes red slowly, then continue to hold until the flashing speeds up).
Assuming you're already doing this, the one other possible issue that I have personally experienced is that my Receiver just refused to talk to the ethernet switch it was plugged in to. (There were other devices happily using that switch, but not the SBR). I swapped over with another switch elsewhere in the network, the SBR's ethernet port sprang into life, and has been rock solid since then. My guess is that there was simply some sort of incompatibility between the ethernet chipsets in the SBR and that particular switch. -- cliveb Transporter -> ATC SCM100A ------------------------------------------------------------------------ cliveb's Profile: http://forums.slimdevices.com/member.php?userid=348 View this thread: http://forums.slimdevices.com/showthread.php?t=54222 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
