My setup is very similar and is working with a Zyxel ISP provided broadband router and Linksys WRT54GS. My music server is hard wired to the Linksys and the SB3 is connected to it via wireless. The Zyxel wireless runs on a different channel and as yours, has the same security settings except for SSID.
Your Linksys Basic setup sounds correct; Auto Configuration - DHCP, Local IP Address set, DHCP disabled. On the Setup, Advanced Routing tab, my Operating Mode is set to Router as detailed in the Linksys documentation. Check yours is. On my Zyxel, it has the usual ISP type settings for obtaining an IP address and DNS from the ISP and DHCP is enabled. The local IP address of the SpeedTouch shouldn't matter so longs as it is in the same network range as the Linksys. Yours is. Check that the Subnet Mask is set the same on both, usually 255.255.255.0 for a standard class C range although your ISP may be using subnetting. Make sure the addessess in the DHCP range are not clashing with any non DHCP connected machines. The other thing to check is whether you have MAC filtering turned on for wireless connections on the Linksys or SpeedTouch. If so, make sure you have the SB MAC in the list. -- Mick Seymour ------------------------------------------------------------------------ Mick Seymour's Profile: http://forums.slimdevices.com/member.php?userid=21137 View this thread: http://forums.slimdevices.com/showthread.php?t=57663 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
