Two simple checks first. 1. If you hard wire the SB to the LAN and reconfigure the SB network interface with a LAN side IP, does it work? That should prove the SB isn't broken.
2. Are you using a crossed or straight cable from SB to the router WAN port? Should you be using a crossed or straight cable from the SB to the router WAN port. My guess, without knowing the router, would be a crossed cable. If that doesn't get you where you need to be, can you give us more info on the hardware setup. I can't tell from your post whether you are using a single router or two bridged routers. As far as using the controller to control the SB is concerned, so long as the SB can connect to SC, control should work. -- Mick Seymour ------------------------------------------------------------------------ Mick Seymour's Profile: http://forums.slimdevices.com/member.php?userid=21137 View this thread: http://forums.slimdevices.com/showthread.php?t=62565 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
