Wirrunna;424576 Wrote: > Another way is to put a 10 ohm resistor between the interconnect screen > and earth AFTER lifting the earth on the interconnect at the preamp end. > This effectively grounds the cable shields while breaking the earth > loop.
It will take me a while to figure out what all that means, not being electronically inclined - but I will try. > > I would also discuss the problem with the EL34 amp constructor. Initiated conversation. > > > Other things I would try - > 1. Move the router/modem as far away from the amp as possible. Tried it. > > 2. Move the SB3 as far away from the preamp as the interconnects will > allow. Tried it. > > 3. Put one of those clunky ferrite clampon rf blockers on the cables to > the SB3, first try the power cable, then the interconnects. Looking into that - didn't have them at radio shack but I'll try calling some places tomorrow. > > 4. Cable connect the SB3 and turn off wireless in the router. Tried that. Seemed to be slightly less interference. I tried a cable connection direct from modem and router - neither made a big difference. -- Superchunk ------------------------------------------------------------------------ Superchunk's Profile: http://forums.slimdevices.com/member.php?userid=29172 View this thread: http://forums.slimdevices.com/showthread.php?t=63455 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
