mjs1138;444476 Wrote: 
> I've been running my slimserver over the wireless router on my network. 
> I've been having stability problems.  I'm wondering if it's possible to
> put a wireless card in my desktop and use it to supply the stream to the
> squeezebox's?  Has any one done this?  First problem I see is that there
> is no DHCP server on the network, so ???
> 
> Any thoughts are appriciated.
> 
> --- Mike

If you don't know why you are having stability problems, it is not
clear that creating a new wireless channel will solve anything for you.
I many places, all the channels are used up in the 2.4GHz band where
802.11b and 802.11g are deployed. So, if your problems are due to
congested wireless spectrum, trying to occupy another (equally busy)
channel may not be the answer.

Have you been able to test a wired Ethernet connection to at least be
sure it is a connectivity issue?

If you try this out, consider using Netstumbler or similar software to
choose a channel that is not being used by you or your neighbors. Then
it should be possible to set up most PCI WLAN adaptors in Ad-hoc mode. 
As you say, you would lack DHCP and have to set up reasonable static
private IPv4 addresses both for the WLAN adaptor and for the Squeezebox
that will connect to it. A basic knowledge of IPv4 addressing would come
in handy, in order to have the IP addresses on the same sub-net, and
consistent with the sub-netmask etc.

Once again, you can try this but it doesn't strike me as a very
promising approach.

Which version of SqueezeCenter/SlimServer is giving you stability
issues, BTW?


-- 
dsdreamer

----------------------
"Dreamer, easy in the chair that really fits you..."
------------------------------------------------------------------------
dsdreamer's Profile: http://forums.slimdevices.com/member.php?userid=12588
View this thread: http://forums.slimdevices.com/showthread.php?t=66108

_______________________________________________
discuss mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/discuss

Reply via email to