Hi, Sorry to pipe in so late but only just read the thread. I had a SB1 and purchased a SB2 and sold the SB1 to a friend. He had real trouble getting it working with his Belkin router. The only way it would work was with encryption off, which is not acceptable. So he purchased a linksys router and all the problems were solved instantly. I have also had problems with Belkin before not specifically linked to SB but still.
Try turning off encryption for a while and see what happens. Scott On Thu, 8 Sep 2005 02:49:22 -0700 CavesOfTQLT wrote: > > Sean: I've opened up the SB2 and checked for loose connections and > everything appears okay. That white connector is fully seated, and it > also looks 'glued', so I assume it's one of the 'updated' units. The > sticker stuck inside says 'Slim Devices May.30 05' > > I've powered it back up, put it 2 feet away from the router, and it > sits there at the 'connecting to wireless network' screen, before going > off completely. Going to 'current settings/view wireless strength' shows > 0%, and every now and then (say 30s to 1min) it'll show 100%, sometimes > 99%, for about 1-2 seconds before going back to 0%. This is one wierd > problem... > > I'll send a message to support like you suggest. Thanks for your input. > > > -- > CavesOfTQLT > _______________________________________________ > Discuss mailing list > [email protected] > http://lists.slimdevices.com/lists/listinfo/discuss +++++++++++++++++++++++++++++++++++++++++++++++++ Scott Culverhouse [EMAIL PROTECTED] (Private E-mail address) +++++++++++++++++++++++++++++++++++++++++++++++++ _______________________________________________ Discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
