Hokie02;469308 Wrote:
> I just set up my SBR with UDAP and everything works fine except for one
> issue. When I reboot my computer or just turn it back on the SBR gets
> stuck on blue and won't go to white. I can fix it by unplugging and
> replugging the SBR with the computer on but this has to be done every
> time. Anything that could be causing this or anything I need to be
> setting differently in UDAP?
Your experience is the same as mine and many posters in these forums.
The only cure I can find is to use static IP addresses instead of DHCP.
Use lan_ip_mode=0 and set up the networking addresses to suit your
network. E.g.,
Code:
--------------------
lan_ip_mode=0
lan_gateway=192.168.1.1
lan_network_address=192.168.1.10
lan_subnet_mask=255.255.255.0
primary_dns=192.168.1.1
--------------------
You will need to figure what are suitable IP addresses and subnet masks
for your particular network; the above is _only_ an example.
Hope that helps
--
dsdreamer
----------------------
"Dreamer, easy in the chair that really fits you..."
------------------------------------------------------------------------
dsdreamer's Profile: http://forums.slimdevices.com/member.php?userid=12588
View this thread: http://forums.slimdevices.com/showthread.php?t=69431
_______________________________________________
discuss mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/discuss
