Follow up: This might be elementary to some of you, but maybe I can save some time for somebody trying to do a reset of an SB3.
I couldn't get past the choose language screen and tried several factory resets (pull the plug, replace plug while pushing + sign) That didn't help, so did a Xilinx reset (pull the plug, replace plug while pushing #1). That got me off square one and to the network password screen. Put in the password using the IR remote about twenty times, but couldn't get the SB3 to be recognized by the network. Some might remember what a challenge entering the network password is with the IR remote. Well it still is! But this forum and the Wiki are also valuable tools. It occurred to me that something was amiss with the way I was entering the password, and I did come across something about "tailing spaces", which was the cause of my troubles. The IR remote is tricky to use for this and it (meaning I) kept unintentionally inserting blank spaces at the end of the password which was causing the non recognition issue. You have to be very careful to push the "right" arrow to enter it at the exact end of your password. If you haven't had to do this in a long time, it's easy to miss, because the error is not readily apparent. Hope this helps. -- Fahzz Living Room: Duet, Adcom GFA 545II, Adcom GFP 555II, Polk SDA 2B Dining Room: Paradigm Atom Monitor v.5 Bedroom: SB3, Pioneer VSX 5700S,Pinnacle PN 5+, M&K VX-7 Subwoofer Router: Linksys WRT54G Server: Acer Aspire Laptop, Windows XP Home ------------------------------------------------------------------------ Fahzz's Profile: http://forums.slimdevices.com/member.php?userid=12585 View this thread: http://forums.slimdevices.com/showthread.php?t=80598 _______________________________________________ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
