pippin;567022 Wrote: > I've heard this before. > It's hard to reproduce, meaning trying it several times seems to do the > trick. > > I suspect that it has to do with selecting the default MAC, that would > clearly be a bug and in this case you could work around it by: > 0. Write down your server's MAC address > 1. Shut down your server > 2. Add your server's IP address manually under "Settings->iPeng > settings->Add Server" > 3. Set the MAC for this server. > > I'll test this and include it in the update to be provided tomorrow.
Hi pippin, Amazingly quick response! Thanks! I'm pretty sure I caused it. Here's what I did: 1. Opened iPeng and played around with squeezebox server 2. Shut down the squeezebox server PC, while leaving iPeng open. 3. Tried to use iPeng after the server was shut down; WOL worked. (good thing :) ) 4. Closed and reopened iPeng; observed the server disappeared from iPeng. This might be a bug: I was expecting it to remember. :( 5. Added the server's IP manually under "Settings->iPeng settings->Add Server" (but did not populate the MAC address - I should have done this, that's my mistake!) 6. Observed that WOL would not work with the manually added IP - even after switching the server PC on and off again, it didn't save the MAC address into the manual entry. :( So it seems that: * Automatically detected servers aren't preserved between closing and opening iPeng * Manually added servers don't get their MAC addresses updated. This is iPhone OS 3.1.2 (I have a 3g :) ) I haven't tested yet, but I'm pretty certain manually adding the server will work around the problem. I'll let you know. -- therealrocket ------------------------------------------------------------------------ therealrocket's Profile: http://forums.slimdevices.com/member.php?userid=39706 View this thread: http://forums.slimdevices.com/showthread.php?t=80940 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
