In article <[email protected]>, dwc<[email protected]> wrote: > Well, if it is an SB2, there's always the chance that certain components > are "end-of-life-ing" on you. I have four SB3's and one of them has > died. it just reboots endlessly. I suspect a bad power component, and > the forum members have offered their help but I never got around to > going in with my multimeter and testing voltage at all the suggested > locations. if you are up for that, you may be able to isolate the bad > component.
Thanks for the input, I did suspect that the SB2 may just be dying. However, some further investigation showed that my wireless signals weren't particularly good. I suspect the wireless was dropping out at regular intervals. I guess this could have been causing the reboots? I've moved the channels on the wireless and things seem a little better for now, but I'll keep an eye on things. Changing topic slightly, when I moved the wireless channel up above about 9, then the SB2 and Controller completely failed to lock on. I suspect that the Dlink router may be the culprit here, cos the SB2 and Controller should work on any channel shouldn't they? They're both correctly set to Europe for the location. Andy _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
