Hi, To configure the Receiver with Net-UDAP, you'll need to have it connected with a wire to your router. Connecting your PC and Receiver together may work, but chances you'll get into problems are more likely.
Once Net-UDAP is able to discover your Receiver, you'll have to configure it so that it uses your wireless network. It's up to you to decide whether you want the Receiver connected to your LAN wired or wireless, and whether you'll use the DHCP protocol or provide static IP configuration, but to begin with, I'd go for the simple 'Wireless, 64-bit WEP, DHCP' (http://projects.robinbowes.com/Net-UDAP/trac/wiki/SampleUsage#Wireless64-bitWEPDHCP) route. Basically, you'd just have to change these values from the sample: Code: -------------------- wireless_SSID=WiFi wireless_wep_key_0=1234567890 squeezecenter_address=192.168.0.2 -------------------- When you're done configuring the Receiver, it'll hopefully connect to your wireless router, get an IP address from it, and will connect to the Squeezebox Server running on your PC. Your Android phone will only have to be connected to your wireless network. Depending on the controller app you'll use, you may need to specify which IP address the server is using. -- sebp 'Last.fm' (http://www.last.fm/user/sebp) ------------------------------------------------------------------------ sebp's Profile: http://forums.slimdevices.com/member.php?userid=11768 View this thread: http://forums.slimdevices.com/showthread.php?t=89505 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
