ralphy;675360 Wrote: > Looks like your audio device doesn't like the default low latency > setting used. > > Try adding -y84 to the command line when starting squeezeslave. If you > still see those errors increase the 84 in increments of 10 until you no > longer see the error messages.
Thanks Ralphy! (I was hoping you'd respond.) I tried up to -y194 and then just for kicks up to -y404, but the messages never go away and the output continues to be tinny (Im not sure it thats the proper term). Also, here is some additional info, it it helps: I am trying to play through HDMI (output 3), and I've also tried 13 and 14 which behave the same: ./squeezeslave -L Expression 'alsa_snd_pcm_hw_params_set_buffer_size_near( pcm, hwParams, &lowLatency )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 904 Expression 'alsa_snd_pcm_hw_params_set_buffer_size_near( pcm, hwParams, &lowLatency )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 904 Expression 'alsa_snd_pcm_hw_params_set_buffer_size_near( pcm, hwParams, &lowLatency )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 904 Output devices: 0: (ALSA) HDA NVidia: ALC889A Analog (hw:0,0) (11/46) 1: (ALSA) HDA NVidia: ALC889A Digital (hw:0,1) (11/46) * 3: (ALSA) HDA NVidia: NVIDIA HDMI (hw:0,3) (11/46) 5: (ALSA) front (11/46) 6: (ALSA) surround40 (11/46) 7: (ALSA) surround41 (11/46) 8: (ALSA) surround50 (11/46) 9: (ALSA) surround51 (11/46) 10: (ALSA) surround71 (11/46) 11: (ALSA) iec958 (11/46) 12: (ALSA) spdif (11/46) 13: (ALSA) hdmi (11/46) 14: (ALSA) hdmi_hw (11/46) 15: (ALSA) dmix (42/42) 16: (OSS) /dev/dsp (11/46) The debug log from squeezeplay (which sounds fine) shows that it is using the following parameters: Plug PCM: Rate conversion PCM (48000, sformat=S16_LE) Converter: linear-interpolation Protocol version: 10002 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Hardware PCM card 0 'HDA NVidia' device 3 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 48000 exact rate : 48000 (48000/1) msbits : 16 buffer_size : 1440 period_size : 480 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 480 period_event : 0 start_threshold : 1 stop_threshold : 1440 silence_threshold: 0 silence_size : 0 boundary : 1509949440 appl_ptr : 0 hw_ptr : 0 Thanks again! -J -- jshoor ------------------------------------------------------------------------ jshoor's Profile: http://forums.slimdevices.com/member.php?userid=40739 View this thread: http://forums.slimdevices.com/showthread.php?t=83362 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
