Wiredcharlie wrote: > Ralphy, > > Thanks for your hard work! > > Regarding the Raspbian port for the Raspberry Pi - I can't get it to > work. If I use the -I switch, it correctly reports my server. If I use > the -L switch it sees audio devices. But if I actually try to connect > with an ip or -F, it closes after a few seconds. > > Any ideas? > > Tony
Hi Ralphy - thanks for getting back. With command line: pi@raspberrypi /usr/bin $ squeezeslave -dslimproto -dslimaudio_http -Y/home/pi/closes.log 192.168.1.100 closes.log: ---------------------------------------------------------------------------------------- proto_thread: state=1 proto_thread: PROTO_CLOSED cond_wait slimproto_connect: (192.168.1.100, 3483) proto_close: state 1 proto_close: not connected http_thread state 2 proto_thread: state=2 proto_sigpipe: MSG_NOSIGNAL proto_connect: connected to 192.168.1.100 proto_thread: state=3 proto_send: cmd=HELO len=36 proto_recv: cmd=vfdc len=174 proto_recv: cmd=vfdc len=174 proto_recv: cmd=vfdc len=174 proto_recv: cmd=audg len=24 proto_recv: cmd=vfdc len=174 proto_recv: cmd=vfdc len=174 proto_recv: (1) n=0 msg=Success(0) proto_close: state 3 proto_thread: state=1 proto_thread: PROTO_CLOSED cond_wait proto_close: state 1 proto_close: not connected -------------------- pi@raspberrypi /usr/bin $ squeezeslave -L Output devices: 0: (ALSA) bcm2835 ALSA: bcm2835 ALSA (hw:0,0) (11/46) 1: (ALSA) sysdefault (11/46) * 2: (ALSA) default (11/46) pi@raspberrypi /usr/bin $ squeezeslave -I music:9000 (192.168.1.100) I don't understand the log file! Thanks Tony ------------------------------------------------------------------------ Wiredcharlie's Profile: http://forums.slimdevices.com/member.php?userid=35115 View this thread: http://forums.slimdevices.com/showthread.php?t=93607 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
