JohnSwenson wrote: > OK, > so what I'm going to do for Gen1 is nothing on the front panel, a green > led on the back that is a real power led, it is directly across the > incoming power feed. > > On the back I'll also put a small RGB led connected to 3 pwm outputs of > the processor, that way the color and intensity is fully under software > control. The control for these is available under sysfs so any program > including an applet under jivelite can control it. By default the led > will be off, it will only go on when some software does something to it. > This will let anybody who wants to play with it do so to their hearts > content. During phase one we can play with it and find out if there is > any use for it and determine if it needs to be on Gen2. > > The Ethernet jack has the fairly standard gigabit two leds, one of which > is dual color. The brightness is going to be the same as on the > wandboard. (I'm just using the wandboard schematic for this) So any of > you that already have a wandboard can look at the Ethernet leds and see > if the brightness is what you want. If feedback gets in in time I can > change the leds for Gen1. > > John S.
Sounds like an excellent plan to me. Guido F. ------------------------------------------------------------------------ guidof's Profile: http://forums.slimdevices.com/member.php?userid=40448 View this thread: http://forums.slimdevices.com/showthread.php?t=97881 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
