My “in-ceiling” project is coming along quite nice. I’ve built the
amplifier and power supply from bits I had laying around. The power
supply might be a bit of overkill but it’s better to have one that is
capable of delivering a bit more power than required… The amplifier is
built around the TDA2040 chip
http://www.datasheetcatalog.org/datasheet/stmicroelectronics/1460.pdf 

In the picture below you see the amplifier’s power supply, the amplifier
and the Wandboard. 


[image: http://imageshack.us/a/img43/2205/20130528communitysqueez.jpg]


I finally chose to use a relays instead of an SSR (just because I still
had the parts laying around for that). The power supply is mounted on a
piece of wood and does not really require an enclosure. Once it sits
behind the ceiling no one will notice that anymore…


'[image:
http://img22.imageshack.us/img22/2205/20130528communitysqueez.jpg]'
(http://imageshack.us/photo/my-images/22/20130528communitysqueez.jpg/)


Below is the schematic of the trigger driver electronics. The left part
resides in the Wandboard enclosure and the right part resides on the
amplifier’s power supply board. The relay simply switches the mains
power to the transformer. 


'[image:
http://img547.imageshack.us/img547/9448/schematictriggerwrelais.jpg]'
(http://imageshack.us/photo/my-images/547/schematictriggerwrelais.jpg/)


It is all tested and it works fine. Now I need to find the time to build
all this in the bedroom ceiling. This system will replace my Squeezebox
Radio I currently use there. The SBR will be used for portable
applications such as the garden (it has a battery). For those of you who
are interested, I’m using DC101 speakers from Artsound:
http://artsound.be/en/products/loudspeakers/p/detail/dc101


------------------------------------------------------------------------
Pascal Hibon's Profile: http://forums.slimdevices.com/member.php?userid=7969
View this thread: http://forums.slimdevices.com/showthread.php?t=98834

_______________________________________________
discuss mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/discuss

Reply via email to