My classic won't power up anymore - no signs of life from the display and does not register with LMS any more. Common behaviour on dead classics is that the Toslink light is on steadily - however on my one it's flashing quickly (about twice a second).
- Tried pressing Add/1 on remote for reset/xilinx reset - Opened it up and removed wifi card, still won't power on - Tried with a wired connection, no change and it doesn't show up on my network - Measured voltage on PSU - I get a steady 5V - Measured voltage under load on contacts on PCB by the PSU connector - I'm getting roughly between 1 - 1.5V showing on the multimeter. I assume I should still be seeing around 5V under load? Based on the last point, is this likely to be a faulty psu or the SB itself? I have a Boom and a SB Radio but unfortunately the power supplies on them are higher voltages so I don't want to risk connecting them. Having looked at used prices on ebay for these, I'm hoping it's just the PSU! ------------------------------------------------------------------------ wurz's Profile: http://forums.slimdevices.com/member.php?userid=5438 View this thread: http://forums.slimdevices.com/showthread.php?t=98936 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
