Is the touch connected directly to the router or is it in a different room with ethernet cables in the wall. If the latter, before replacing the router, I'd move the touch temporarily near the router and connect it to the router directly. So you'd have the touch and NAS connected directly to the router. Maybe replace the ethernet cables. cables and cable ends can go bad. And don't sync. Then see if you get buffering then using the Touch. If you do, then the router might be the issue. If you don't then it may be something between the router > ethernet cabling > touch in other room. Also, when you say connected via ethernet, it is actually ethernet connection or is it something like "ethernet over powerline" or MoCa (ethernet over cable)? Are there any intermediate switches involved?
then again, if you router is more than 2 or 3 years old, you can likely get a much better router for a cheap price anyhow. *Location 1:* VortexBox (2.2) > LMS 7.8 > Transporter, Touch, Boom, Radio w/Battery (all ethernet except Radio) *Location 2:* VBA 3TB (2.2) > LMS 7.7.2 > Touch > Benchmark DAC I, Boom, Radio w/Battery (all ethernet except Radio) *Office:* Win7(64) > LMS 7.8 > SqueezePlay *Spares:* VBA 4TB, SB3, Touch (3), Radio (3), CONTROLLER *Controllers:* iPhone4S (iPeng), iPad2 (iPengHD & SqueezePad), CONTROLLER, or SqueezePlay 7.8 on Win7(64) laptop Ripping (FLAC) - dbpoweramp, Tagging - mp3tag, Spotify ------------------------------------------------------------------------ garym's Profile: http://forums.slimdevices.com/member.php?userid=17325 View this thread: http://forums.slimdevices.com/showthread.php?t=100272 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
