callesoroe wrote: > Hi > > I am running LMS 7.8 on a ReadyNas ultra. I am trying to get > Monkeysqueeze to work too, but it does not work. > The squeeze icon goes turqish in mediamonkey, and it is synchronizing > the playlists, but nothing showes up in LMS playlist ?? > It plays on the computer but not in the squeezebox. It does not show up > as a player in LMS ???? Should'nt it do that ??? > Setup is this > > see attach > > Anyone who can see the error ?
MonkeySqueeze will not show as a player in LMS. The only way you know it's working correctly is when the tracks load the same as MediaMonkey. I can't view your attached images so I cant see your settings, however your symptoms indicate that the communications between MM and the NAS aren't working and are not setup correctly. Do the following: 1. On the options page make sure the LMS IP address and HTTP port number are correct. Go to the LMS web page > Settings > Information > LMS Server Status to find the info. 2. On the options page check the Primary Squeezebox Device MAC address. Go to the LMS web page > Settings > Information, find the device and compare the address making sure you use the same case. (Make sure the device is on and linked to the server) 3. On the options page under LMS on a Linux or Windows Server/NAS, deselect/uncheck LMS is prior to v7.5.1 4. On the options page under LMS on a Linux or Windows Server/NAS you can use the network address or a mapped address for the MediaMonkey Music Folder 5. On the options page under LMS on a Linux or Windows Server/NAS make sure the LMS Media Folder uses forward slashes (/). 6. On the options page under LMS on a Linux or Windows Server/NAS make sure the addresses are the same case as the source. Using a lower case when it should be upper case or vice versa can cause communication problems. 7. Press the red MonkeySqueeze button in MediaMonkey to enable communications. Should be turquoise when on. To test the communications play some music on your main Squeezebox device. In MediaMonkey load/place different music in the Now Playing/Playlist window, select play and then enable MonkeySqueeze. The music playing on the SB device will stop and be replaced by the music in MediaMonkey :). If the music stops on the device but is not replaced by the MediaMonkey music then your comms are working but there is an error with one of the parameters :-?. If the music continues to play on the device then the comms are not working at all :(. Let me know how you get on. Gingernut63 P.S. I haven't tried MonkeySqueeze with LMS 7.8 but it should work.....?? MonkeySqueeze - Squeezing music into your life! http://twitter.com/#!/MonkeySqueeze1 MonkeySqueeze Support: http://www.mediamonkey.com/forum/viewtopic.php?f=2&t=59515 MonkeySqueeze Development: http://www.mediamonkey.com/forum/viewtopic.php?f=19&t=59907 1 x Boom - 2 x Duets - 2 x piCorePlayer/Raspberry Pi - iPeng on 2 x iPod Touch - Orange Squeeze/Squeeze Player on Android Phone - SqueezePlay/MediaMonkey on ThinkPad Tablet 2 HP N40L MicroServer running WHS 2011 and LMS ------------------------------------------------------------------------ Gingernut63's Profile: http://forums.slimdevices.com/member.php?userid=48490 View this thread: http://forums.slimdevices.com/showthread.php?t=89046 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
