On 5-Nov-05, at 1:54 PM, bjackson wrote:
I have a SB2 Wireless and I am having a problem that it is very noisy
on
the outputs in a digital way.
i.e. whenever the wireless is in use there is a lot of noise on the
outputs. When I start playing a new song there is a definite buzz out
of it that is not a pure sine wave (it's kinda clicky, like I can hear
it switch on and off very quickly). Also when I turn up or down the
volume control you can hear the clicks.
you should contact support. There was an early production issue, easily
repaired if yours falls into this group.
if you are handy with a soldering iron, its fixable by yourself with
instructions (they were posted here with pics, I believe, when the SB2
first came out).
There is an internal antenna with the SB2, so you could try unscrewing
the external antenna.
Some users have found that the little power supply that comes with the
squeezebox can be noisy (usually affecting only the AM radio). Many
have found not so expensive replacements to avoid this. However, I
don't recall any mentioning issues with the RCA outputs. do you have
digital inputs on your amp anywhere? That would also be an option.
Regardless, I'd certainly get in touch with [EMAIL PROTECTED]
-kdf
_______________________________________________
Discuss mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/discuss
