JRatron wrote: > I have the case here now, so I'll get the standard back panel drawn up > shortly. If you still want to send me the mockup board with the > connectors on, I'll get that sorted ASAP.
Here is a PDF of the connectors on the back of the board, some are on the top and some on the bottom. >From the left they are: top: headphone jack 3.5mm - SJ1-3523N bottom: RCA - KLPX-0848A-2-R-G top: XLR - NC3MAH bottom: RCA - KLPX-0848A-2-R-G top: XLR - NC3MAH bottom: TOSLINK - PLT133/T10W top: BNC - 364M795L bottom:power LED - WP138A8QMP top: barrel jack - PJ102A bottom: micro USB - 10104111-0001LF top: dual stacked full size A USB - 72309-8034BLF bottom: micro USB - 10104111-0001LF top: HDMI - 10029449-001RLF bottom: micro USB - 10104111-0001LF top: Ethernet - J0G0001NL bottom: micro USB - 10104111-0001LF There also needs to be a hole to mount the wi-fi antenna jack. It has its own pigtail coming from the module. It should be above the board. The connector on the module is on the left side. 15834 I hope this is enough info. Thanks, John S. +-------------------------------------------------------------------+ |Filename: CSP1_back_panel.pdf | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=15834| +-------------------------------------------------------------------+ ------------------------------------------------------------------------ JohnSwenson's Profile: http://forums.slimdevices.com/member.php?userid=5974 View this thread: http://forums.slimdevices.com/showthread.php?t=97881 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
