wortgefecht wrote:
> So, Xlinx reset helped. Problem solved, thx.
Hey folks - I realize this thread is pretty old, but I'm running into
this EXACT issue on both of my Squeezebox 3s. I happen to have been
using mobile app/browser for a long time and only recently tried to use
the old fashioned IR remote since getting a Harmony Hub. For the
longest time, I thought it was the hub, until I whipped out the actual
SB3 remote and reproduced it with the H.Hub completely out of the room.
Then, I figured, hey, I have two of these Squeezebox 3s, maybe the IR
receiver in the one is jacked up somehow... so I plug-in the other and
get the same behavior described by the OP. Various lanes of
troubleshooting have lead me to think that perhaps there really is
something jacked up with the hardware. I happen to also have a SB
Touch, which DOES NOT have this issue with its IR remote and, in fact,
works perfectly with the remote from the SB3 as well. (assuming the
touch doesn't route IR through LMS as those entries don't show up in the
logs). As far as LMS versions - all devices are currently running off of
one of the the latest nightly builds: 7.9.0 - 1482423225 @ Wed Dec 28
04:04:47 CUT 2016. When this all started, I was still running the final
Logitech release - no difference in behavior.
I enabled DEBUG logging for the IR module as suggested above and it
appears that a single IR press is interpreted nearly endlessly:
Code:
--------------------
[17-01-01 22:14:16.0391] Slim::Hardware::IR::lookupCodeBytes (445) 7689b04f
-> code: arrow_down
[17-01-01 22:14:16.0395] Slim::Hardware::IR::processIR (687) 7689b04f
371488.485 1483326856.03936
[17-01-01 22:14:16.0399] Slim::Hardware::IR::lookup (474) Found button
arrow_down for 7689b04f
[17-01-01 22:14:16.0402] Slim::Hardware::IR::lookupFunction (518) Found
function: down for button arrow_down in mode common (current mode: INPUT.Text)
[17-01-01 22:14:16.0405] Slim::Hardware::IR::processIR (782) irCode = [down]
timer = [371488.485] timediff = [622.977000000014] last = [dead]
[17-01-01 22:14:16.0408] Slim::Hardware::IR::processCode (1119) irCode: down,
00:04:20:06:0b:6d
[17-01-01 22:14:16.0413] Slim::Hardware::IR::lookupFunction (525) irCode not
defined: [down] for mode: [INPUT.Text]
[17-01-01 22:14:16.0416] Slim::Hardware::IR::executeButton (1066) Trying to
execute button [down] for irCode: [down]
[17-01-01 22:14:16.0421] Slim::Hardware::IR::executeButton (1097) Executing
button [down] for irCode: [down] Slim::Buttons::Input::Text::__ANON__
[17-01-01 22:14:16.0883] Slim::Hardware::IR::lookupCodeBytes (445) 7689b04f
-> code: arrow_down
[17-01-01 22:14:16.0886] Slim::Hardware::IR::processIR (687) 7689b04f
371488.535 1483326856.08848
[17-01-01 22:14:16.0891] Slim::Hardware::IR::lookup (474) Found button
arrow_down for 7689b04f
[17-01-01 22:14:16.0894] Slim::Hardware::IR::lookupFunction (518) Found
function: down_repeat for button arrow_down.repeat in mode common (current
mode: INPUT.Text)
[17-01-01 22:14:16.0897] Slim::Hardware::IR::repeatCode (972) irCode =
[down_repeat] timer = [371488.535] timediff = [0.0499999999883585] last = [down]
[17-01-01 22:14:16.0900] Slim::Hardware::IR::processCode (1119) irCode:
down_repeat, 00:04:20:06:0b:6d
[17-01-01 22:14:16.0904] Slim::Hardware::IR::lookupFunction (525) irCode not
defined: [down_repeat] for mode: [INPUT.Text]
[17-01-01 22:14:16.0907] Slim::Hardware::IR::executeButton (1066) Trying to
execute button [down_repeat] for irCode: [down_repeat]
[17-01-01 22:14:16.0911] Slim::Hardware::IR::executeButton (1097) Executing
button [down_repeat] for irCode: [down_repeat]
Slim::Buttons::Input::Text::__ANON__
[17-01-01 22:14:16.1062] Slim::Hardware::IR::lookupCodeBytes (445) 7689b04f
-> code: arrow_down
[17-01-01 22:14:16.1066] Slim::Hardware::IR::processIR (687) 7689b04f
371488.553 1483326856.10642
[17-01-01 22:14:16.1069] Slim::Hardware::IR::lookup (474) Found button
arrow_down for 7689b04f
[17-01-01 22:14:16.1072] Slim::Hardware::IR::lookupFunction (518) Found
function: down_repeat for button arrow_down.repeat in mode common (current
mode: INPUT.Text)
[17-01-01 22:14:16.1075] Slim::Hardware::IR::repeatCode (972) irCode =
[down_repeat] timer = [371488.553] timediff = [0.0180000000400469] last =
[down_repeat]
[17-01-01 22:14:16.1078] Slim::Hardware::IR::processCode (1119) irCode:
down_repeat, 00:04:20:06:0b:6d
[17-01-01 22:14:16.1082] Slim::Hardware::IR::lookupFunction (525) irCode not
defined: [down_repeat] for mode: [INPUT.Text]
[17-01-01 22:14:16.1085] Slim::Hardware::IR::executeButton (1066) Trying to
execute button [down_repeat] for irCode: [down_repeat]
[17-01-01 22:14:16.1089] Slim::Hardware::IR::executeButton (1097) Executing
button [down_repeat] for irCode: [down_repeat]
Slim::Buttons::Input::Text::__ANON__
[17-01-01 22:14:16.1614] Slim::Hardware::IR::lookupCodeBytes (445) 7689b04f
-> code: arrow_down
[17-01-01 22:14:16.1617] Slim::Hardware::IR::processIR (687) 7689b04f
371488.608 1483326856.16159
[17-01-01 22:14:16.1620] Slim::Hardware::IR::lookup (474) Found button
arrow_down for 7689b04f
[17-01-01 22:14:16.1624] Slim::Hardware::IR::lookupFunction (518) Found
function: down_repeat for button arrow_down.repeat in mode common (current
mode: INPUT.Text)
[17-01-01 22:14:16.1626] Slim::Hardware::IR::repeatCode (972) irCode =
[down_repeat] timer = [371488.608] timediff = [0.0549999999930151] last =
[down_repeat]
[17-01-01 22:14:16.1629] Slim::Hardware::IR::processCode (1119) irCode:
down_repeat, 00:04:20:06:0b:6d
[17-01-01 22:14:16.1633] Slim::Hardware::IR::lookupFunction (525) irCode not
defined: [down_repeat] for mode: [INPUT.Text]
[17-01-01 22:14:16.1636] Slim::Hardware::IR::executeButton (1066) Trying to
execute button [down_repeat] for irCode: [down_repeat]
[17-01-01 22:14:16.1641] Slim::Hardware::IR::executeButton (1097) Executing
button [down_repeat] for irCode: [down_repeat]
Slim::Buttons::Input::Text::__ANON__
--------------------
The first line is the initial button-press, then the following five are
what appears to be standard lookup/execution procedures, however, after
the 6th line, it just repeats this sequence endlessly until finally
giving up after more than 1000 lines. I confirmed a single button-press
by using my phone's camera, so it's not that. And the XLinx reset on
both units didn't make any difference. Also, since it's the LMS
interpreting the IR and sending commands, I wondered what would happen
when removing it from the equation all together, so I rebooted the SB3
and managed to get it connected to mysqueezebox.com instead of my local
LMS. I confirmed it wasn't showing in LMS and attempted to use the IR
remote again and sure enough, same deal. I'm wondering if perhaps we're
at a firmware issue here?
I feel like I've chased down everything I possibly could and am hoping
one of you smart folks might be able to give me a clue as to what to
consider next. Thanks in advance - I hope this is enough info. Cheers!
:cool:
------------------------------------------------------------------------
marticus24's Profile: http://forums.slimdevices.com/member.php?userid=2441
View this thread: http://forums.slimdevices.com/showthread.php?t=104438
_______________________________________________
discuss mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/discuss
