Jeff07971 wrote: > Hi Cliveb, > > You don't actually have to do any scripting to do this its built into > pCP (SL actually) > > I use Powerswitch3 for my SB3's and pCP built in for my pCP based > players > > All drive 16A SSR's directly > > Jeff > > 32631 > Well, my apologies for not finding out about this! A genuinely embarrassing face-palm moment on my part.
That said, I have now tried playing around with the Squeezelite Power on/off GPIO settings, and haven't been able to make it work. Let me just ask a couple of questions to make sure it does what I'm hoping for: 1. The help for the setting says: "Squeezelite will toggle this GPIO when the Power On/Off button is pressed" I interpret this to mean that when I click the power button for the picoreplayer in the LMS web interface (and by extension, if I switch the player on/off using a Duet controller or phone app such as Squeezer), it should toggle the GPIO pin. Is that correct? I hope it is, because that's exactly what I want it to do. 2. What numbering for the GPIO pins is used in this setting? Does it use the physical hardware pin numbers, the (non-sequential) RPi numbering, or some other scheme? I ask this because I've tried both physical and RPi numbering, and neither seem to work. For example, if I set the Squeezelite to use GPIO 13, is this the physical pin #13 (aka GPIO 27 in RPi-speak), or physical pin #33 (aka GPIO 13)? I've tried checking both pins with a multimeter, and neither seem to toggle. Pin #33 (GPIO 13) stays stubbornly high, and pin #13 (GPIO 27) stays stubbornly low. Another way of asking the question: If I set the Squeezelite power on/off to GPIO 13, which physical pin will it control? Transporter -> ATC SCM100A ------------------------------------------------------------------------ cliveb's Profile: http://forums.slimdevices.com/member.php?userid=348 View this thread: http://forums.slimdevices.com/showthread.php?t=113507 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
