paul- wrote: > Turning the gpio-poweroff on then off would put things back in the > default state. There is nothing special that needs to be done. However > if two drivers are trying to claim the same GPIO, then things are > unpredictable. OK, thanks.
Q: is the gpio-poweroff option another way of achieving the same thing as the Squeezelite power on/off setting? (The options states "Refer to /mnt/mmcblk0p1/overlays/README", but that file doesn't exist). paul- wrote: > You've mentioned a pi2 and a pi4, I really think you've been swapping > things around, and getting a wrong IP address. No, I absolutely haven't been getting them mixed up. They were never powered up at the same time. I know the IP addresses I used were correct. paul- wrote: > Check the information page on the LMS settings interface, it will list > all known players connected (or those recently connected) and their ip > adresses. Do you see more than one called piCorePlayer? As far as I can see, my LMS (7.9.2) only lists the players currently connected. Perhaps recently connected ones are shown in later versions of LMS? paul- wrote: > Oh, and if you are using internet streaming services, you really need to > upgrade your LMS server. If you are just using local music, then 7.9.2 > is fine. I only use local music. Mind you, I did wonder if the fact that LMS is running on version 4.1.0 of piCorePlayer, but the players I'm testing are running version 6.1.0, might be a factor. But that wouldn't explain why the Pi2 started working and the Pi4 still won't. And I still don't understand why the Pi2 started working when it had previously not been. But if you are confident that updating LMS would solve this problem, I'll give it a go. I know it sounds suspicious, but I am 100% certain that I haven't been getting any IP addresses wrong. I just restarted the Pi4, it appears in LMS with an IP address of 192.168.0.107, and when I ssh to that address and play with pcp-gpio, the pins work as expected. But they don't respond to switching the player on & off from LMS. I even went to the extent of re-writing the SD card with a fresh piCorePlayer image and starting again from scratch, just in case something had become corrupted. But it still doesn't work. Transporter -> ATC SCM100A ------------------------------------------------------------------------ cliveb's Profile: http://forums.slimdevices.com/member.php?userid=348 View this thread: http://forums.slimdevices.com/showthread.php?t=113507 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
