Hi, all is in the title : I'm trying to build an network of pcp, each running on a RPI zero.
These RPIs have no WiFi, so they have a USB to Ethernet adapter. The issue is that, each adapter has the same MAC address (!). After searching in forums this seems to be rather common with cheap adapters. This disturbs of course the Ethernet switch that connects all the RPIs. I managed to get the system to work, by adding on each RPI a command executed at boot time (in /opt/bootlocal.sh) which sets the adapter MAC address : sudo ifconfig eth0 hw ether NEW_MAC_ADDRESS The NEW_MAC_ADDRESS is different for each RPI. I've also put this command in the user commands (pcp menu, Tweaks/User commands). These tricks are not fully stable : sometimes I have to start a RPI twice, because at first boot the adapter gets its original MAC address and not the new one. I've also tried to set the MAC address from the 'Squeezelite Settings' in the pcp menu, but this doesn't change the address (maybe it's only for WiFi connection ?). I consider 2 options : - replace my adapters with standard compliant ones (so with a different MAC address for each adapter), - replace my Ethernet switch by a managed switch (seems that with a managed switch I could set the IP address of each connected device, from it's port number on the switch). But a software solution is preferred. Maybe my command (added in /opt/bootlocal.sh) is too late in the boot process. Any suggestion is welcome. Claude ------------------------------------------------------------------------ ClaudeBoulard's Profile: http://forums.slimdevices.com/member.php?userid=68413 View this thread: http://forums.slimdevices.com/showthread.php?t=114648 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
