On Dec 11, 2005, at 11:32 AM, Bailx wrote:
actually i dont know if this will work....
on one of my sb3's the plate came right off. on this other one... the
middle was very well glued apparently and the sides were loose.... it
got very bent up during the removal process. i've done my best to
bend
it back the way it should be, but there are visible lines in the metal
now, which will be there permanently without some sort of metal worker
dude working no it... which I am not.
One thing that we found was that due to the tolerances on the older
plates, if the screws holding the back to the front were VERY tight,
the plate would be pushed by the back case away from the front
panel. Loosening the screws just slightly would reduce that pressure
and the plates will stay attached better. If you are comfortable
doing that, it may help keep it from popping off.
was the offer for replacement plates legitimate?
absolutely.
if so I'd like to go
ahead and do that... who do we contact?
email [EMAIL PROTECTED]
_______________________________________________
Discuss mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/discuss
