Did you try WPA-TKIP? Works fine for me with a
WRT54G v4, running Linksys firmware 4.20.6, 4.20.7
and DD-WRT 23 beta 1 and 23 final.
Should be much better than WEP at least.
WPA2-AES is still very new.
GrahameP wrote:
> Hi,
>
> I've just had to replace my router due to a failure
of the old Linksys
> WRT54G, and I now have a brand new WRT54GS V4. I
would have liked more
> time to investigate and select the best router and
to have avoided PC
> World, but it was Sunday and I'd lost the internet,
etc, etc.
>
> When I had the old WRT54G (v1.0) I tried changing
the wireless from WEP
> 128-bit to WPA, but couldn't make it work with my
Squeezebox 2. I've
> tried again with the new router, and I get the same
results. I can
> configure the SB2 to use WPA2 Personal and set the
shared key, but
> although it sees the network, it fails to connect.
After a couple of
> hours of trying different options in the router
setup I gave up and
> went back to WEP 128-bit and all is well. Does
anyone have this
> working correctly, and if so, how? By the way, both
routers are on the
> supplied Linksys firmware.
>
> Cheers,
> Grahame.
>
>
--
___________________________________
Mark Lanctot
___________________________________
__________________________________________________________
Find your next car at http://autos.yahoo.ca
_______________________________________________
Discuss mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/discuss
