ntom Wrote: > Can anyone suggest where my problem may lie....i'm left scratching my > head at the moment!! > > I have been using SB3 for some time using wireless & all is fine. > > Last weekend I thought i'd try out a cable connection for the heck of > it to see if it sounds any different.... > > Installed cable -it is routed all around loft & down an outside wall > -prob about 45 metres of cable (& took a few hours to install). > Connect up & .... nothing! > > The connection LED on my modem does not come on. So I rewired the > connections ....same problem. I've tried a continuity test on pins > 1,2,3 & 6 which I believe are the relevant pins & it checks out! > > Plug in my RIO Karma FLAC player & it's fine, & both ethernet lamps > come so cable should be OK. > > Prob with SB3 maybe? No! Ive plugged SB3 into my hub using a 1m > ethernet cable & it's fine. > > What could be wrong.... the longer cable connects to a RIO Ok & its > seen on the network. Use the SB3 & nothing. > > Q: Is the SB3 ethernet connection not happy with low signal levels > -whats the longest cable connection out there that works OK?? Could it > be that the ethernet cable comes through the wall amongst a bit of a > spaghetti of hifi cable & connections -i've done my best to > re-arrange, but no joy. Tried alternate router connections & no > joy.... > Thought ethernet could take 100m....?? > > Anyone able to make any suggestions....?? I believe you have to Setup Networking again on the Squeezebox. I think it operates only one ethernet interface at a time, either wired or wireless. As soon as you power on, press the RIGHT key to Setup Networking.
-- jonheal Jon Heal says: Have a nice day! http://www.theheals.org/ ------------------------------------------------------------------------ jonheal's Profile: http://forums.slimdevices.com/member.php?userid=2133 View this thread: http://forums.slimdevices.com/showthread.php?t=24689 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
