Jerryacg Wrote: > Thanks for the reply. All 3 are SB3s. How do I adjust where the decoding > is done?
To decode on the squeezeboxes: Server Settings -> File Types -> make sure the line that says FLAC FLAC (built-in) is checked Are you running an 802.11g access point? If you're running an older b-only access point, or if your AP is in b mode, then you are likely to experience some bandwidth issues. Also, remember that even if you have a g access point the speed of your entire wireless network will suffer if you have any b-only devices it. Oh, and wireless network speed is shared amongst all wireless devices so if you have a lot of wireless clients using your network then there might not be a lot of bandwidth left over for your SB3s. A couple other tips: - Check to see that you're running a recent version of Slimserver. Fairly recent firmware updates have increased wireless performance. - Try updating your access point's firmware. If it's an older access point there may be some significant improvements available. Good luck! -- azinck3 ------------------------------------------------------------------------ azinck3's Profile: http://forums.slimdevices.com/member.php?userid=3967 View this thread: http://forums.slimdevices.com/showthread.php?t=26010 _______________________________________________ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
