> Here's how it SHOULD work: > - you connect a crossover wire to the SB Ethernet port, and connect the > other end to the device you want to bridge. Yup - done that. When you change region on the SB2 or power cycle it the machine on the other end of cable sees LINK down then up. > - on reset* if you request to connect to SlimServer wirelessly, the next > option would be to bridge the connection. Note you have to connect to > SlimServer wirelessly, the firmware then says to itself "well the user > wants to connect wirelessly and my Ethernet port is connected to > something, therefore present the bridge option." You sure you haven't > accidentally selected wired networking? On either power cycle with Factory Reset or just hitting Left for 5 seconds the same options appear.
The 'Bridge Network' option is not amongst them - it just disappeared! See above, sure it was there on Firmware 62. Yup - I'm defo on wireless. > - you sure the cable is OK? Yup - connected two machines with it as a test - works just fine. > - do you have MAC filtering enabled in the router and is the bridged > device on the permitted MAC list? Nope - no MAC filtering, sure of that. I think this is now down the the Bridge option disappearing - nothing in bug list about this, will raise one: http://bugs.slimdevices.com/show_bug.cgi?id=4570 -- raintonr ------------------------------------------------------------------------ raintonr's Profile: http://forums.slimdevices.com/member.php?userid=1023 View this thread: http://forums.slimdevices.com/showthread.php?t=30375 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
