TechHome;170475 Wrote: > I use the IR blaster plugin to turn a Yamaha receiver on & off with the > SB2. It works equally well with the squeezbox remote as it does via > the web interface, including the 770 as controller. This control > enables having the equipment in a head-end equipment closet type > installation. One limit I have with the Yamaha is that I do not have > discrete IR codes for "On" and "standby". The issue is that the SB and > receiver power can and does get out-of-phase. Other receivers (Denon, > et al) have discrete IR codes, that will avert this issue. > > Note that in the custom-installer arena, equipment control via RS-232 > or IP is greatly preferred over IR. The fact that the Transporter has > RS-232 makes it a much more attractive product for placing it under the > control of automation systems such as Crestron & AMX...but it also opens > the door to a Linux based control system with Slimserver and the > Transporter acting as the IP to IR and IP to RS-232 bridge. > > TechHome
What Yamaha do you have? Mine (RX-V995a) has codes for On and Standby. -- SuperQ ------------------------------------------------------------------------ SuperQ's Profile: http://forums.slimdevices.com/member.php?userid=2139 View this thread: http://forums.slimdevices.com/showthread.php?t=31665 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
