snarlydwarf;170695 Wrote: > tbessie, do you know how to use ethereal or tcpdump to create a packet > capture so we can see what it is doing?
Well, I ran Ethereal (well, Wireshark) with 3 different scenarios. I also unplugged any other devices I had connected to make sure there was as little traffic as possible. The IPs and MACs are as below. Perhaps this will help diagnose the problem? It LOOKS like the same symptoms Christopher was having (tho' I'm not a network expert): 192.168.1.101 / 00:13:20:09:de:cd (IntelCor_09:de:cd) : The computer running SlimServer 192.168.1.150 / 00:04:20:06:db:3d (SlimDevi_06:db:3d) : Static IP / MAC for my SqueezeBox 192.168.1.1 / 00:18:39:c1:84:b0 (Cisco-Li_c1:84:b0) : My Wireless Router 1) SlimServer is on, my SqueezeBox is plugged in but off, and I press the "On" button on the SqueezeBox (I get the "waking up" and "connecting" messages on the SqueezeBox, but it does not connect, and goes blank. I press "On" again, and the same thing happens. ( http://www.sonic.net/~tbessie/misc/capture-squeezebox-onbutton-2x.html ) 2) SlimServer is on, my SqueezeBox is plugged in but off, and I do nothing but capture (no pressing of buttons) ( http://www.sonic.net/~tbessie/misc/capture-squeezebox-nopush.html ) 3) SlimServer is on, my SqueezeBox is plugged in but off. I press "On", get the "waking up" message, but press "back", go to "set up networking" and run through the menus, the SqueezeBox restarts, connects to the network again, I press "forward" until I the SqueezeBox AGAIN goes blank. Then press "On", and the SqueezeBox connects to SlimServer. ( http://www.sonic.net/~tbessie/misc/capture-squeezebox-on-reset-on-connect.html ) -- tbessie ------------------------------------------------------------------------ tbessie's Profile: http://forums.slimdevices.com/member.php?userid=8521 View this thread: http://forums.slimdevices.com/showthread.php?t=31661 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
